ZyXEL Communications Parental Control Gateway HS100/HS100W - Manual (Page 111)

HomeSafe User’s Guide
7-18 Wireless Security
Figure 7-12 WLAN : MAC Address Filter
The following table describes the labels in this menu.
Table 7-9 WLAN : MAC Address Filter
LABEL DESCRIPTION
Active Select Yes from the drop down list box to enable MAC address filtering.
Filter Action Define the filter action for the list of MAC addresses in the MAC Address table.
Select Deny Association to block access to the HomeSafe, MAC addresses not listed
will be allowed to access the HomeSafe
Select Allow Association to permit access to the HomeSafe, MAC addresses not listed
will be denied access to the HomeSafe.
Set This is the index number of the MAC address.
MAC
Address Enter the MAC addresses (in XX:XX:XX:XX:XX:XX format) of the wireless station that are
allowed or denied access to the HomeSafe in these address fields.
Apply Click Apply to save your changes back to the HomeSafe.
Reset Click Reset to reload the previous configuration for this screen.