ZyXEL Communications Parental Control Gateway HS100/HS100W - Manual (Page 311)

HomeSafe User’s Guide
34-2 Call Scheduling
Figure 34-2 Menu 26.1 Schedule Set Setup
If a connection has been already established, your HomeSafe will not drop it. Once the
connection is dropped manually or it times out, then that remote node can't be triggered up until
the end of the Duration.
Table 34-1 Menu 26.1 Schedule Set Setup
FIELD DESCRIPTION EXAMPLE
Active Press [SPACE BAR] to select Yes or No. Choose Yes and press
[ENTER] to activate the schedule set. Yes
Start Date Enter the start date when you wish the set to take effect in year -month-
date format. Valid dates are from the present to 2036-February-5. 2000-01-01
How Often Should this schedule set recur weekly or be used just once only? Press
the [SPACE BAR] and then [ENTER] to select Once or Weekly. Both
these options are mutually exclusive. If Once is selected, then all
weekday settings are N/A. When Once is selected, the schedule rule
deletes automatically after the scheduled time elapses. Once
Once:
Date
If you selected Once in the How Often field above, then enter the date
the set should activate here in year-month-date format. 2000-01-01
Weekday:
Day
If you selected Weekly in the How Often field above, then select the
day(s) when the set should activate (and recur) by going to that day(s)
and pressing [SPACE BAR] to select Yes, then press [ENTER]. Yes
No
N/A
Start Time Enter the start time when you wish the schedule set to take effect in hour-
minute format. 09:00
Duration Enter the maximum length of time this connection is allowed in hour-
minute format. 08:00
Menu 26.1 - Schedule Set Setup
Active= Yes
Start Date(yyyy/mm/dd) = 2000 – 01 - 01
How Often= Once
Once:
Date(yyyy/mm/dd)= 2000 – 01 - 01
Weekdays:
Sunday= N/A
Monday= N/A
Tuesday= N/A
Wednesday= N/A
Thursday= N/A
Friday= N/A
Saturday= N/A
Start Time (hh:mm)= 00 : 00
Duration (hh:mm)= 00 : 00
Action= Forced On
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle