ZyXEL Communications Parental Control Gateway HS100/HS100W - Manual (Page 55)

HomeSafe User’s Guide
2-22 Introducing the Web Configurator
Table 2-17 Screens Summary
LINK TAB FUNCTION
WIZARD SETUP
CONNECTION
Use these screens for initial configuration including general setup,
Wireless LAN setup, ISP parameters for Internet Access and WAN
IP/DNS Server/MAC address assignment.
PARENTAL
CONTROL Use these screens to create user profiles, configure a user category
for blocking services, register for content filtering and configure time
allowances.
ADVANCED
SYSTEM General This screen contains administrative and system-related information.
DDNS Use this screen to set up dynamic DNS.
Password Use this screen to change your password.
Time Zone Use this screen to change your HomeSafe’s time and date.
IP Use this screen to configure LAN DHCP, TCP/IP settings and to
enable Any IP.
Static DHCP Use this screen to assign IP addresses on the LAN to specific
individual computers based on their MAC Addresses.
LAN
IP Alias Use this screen to partition your LAN interface into subnets.
Wireless Use this screen to configure wireless LAN.
MAC Filter Use the MAC filter screen to configure the HomeSafe to block
access to devices or block the devices from accessing the
HomeSafe.
Roaming This screen allows you to configure your HomeSafe roaming
capabilities.
802.1x/WPA This screen allows you to configure 802.1x enhanced security
method for both the authentication of wireless stations and
encryption key management.
Local User
Database This screen allows you to configure a database internal to the
HomeSafe.
WIRELESS
RADIUS This screen allows you to configure an external RADIUS server for
an unlimited number of users.
Route This screen allows you to configure route priority.
WAN ISP Use this screen to change your HomeSafe’s WAN ISP settings.
WAN IP Use this screen to change your HomeSafe’s WAN IP address
settings.
WAN MAC Use this screen to change your HomeSafe’s WAN MAC settings.
WAN
Traffic Redirect Use this screen to configure your traffic redirect properties and
parameters.
SUA Server Use this screen to configure servers behind the HomeSafe.
Address
Mapping Use this screen to configure network address translation mapping
rules.
SUA/NAT
Trigger Port Use this screen to change your HomeSafe’s trigger port settings.
STATIC ROUTE IP Static Route Use this screen to configure IP static routes.