ZyXEL Communications omni.net Plus User Manual
Zyxel, Isdn terminal adapters
This manual is related to the following products:
Table of contents
Document Outline
- Table 1. Specifications 1-2
- Preface
- Introduction
- Using ZyXEL® ISDN Configuration Manager
- LCD Panel Operation (for ZyXEL omni.net LCD/LCD+M)
- ISDN Communication Basics
- Understanding AT Commands
- Outgoing Calls
- Dialing Data Calls
- Dial Out Voice Calls (for ZyXEL omni.net LCD/LCD+M//Plus)
- Dialing Out using internal Fax/modem (for ZyXEL omni.net LCD+M)
- Dialing Out Using ISDN Mode Optional Speech Bearer Service
- Manually Switching Communication Mode (for ZyXEL omni.net LCD/LCD+M/Plus)
- Placing a Data Call
- Multi-Auto Dial Out (MDO) for Outgoing Data Calls
- Incoming Calls
- Supplementary Service (for ZyXEL omni.net LCD/LCD+M/Plus)
- Feature Phone Operation(for omni.net LCD/LCD+M/Plus)
- Point-to-Point Protocol (PPP)
- V.110, V.120, X.75 and Synchronous Mode ISDN Communications
- Internal Fax/Modem Function(for ZyXEL omni.net LCD+M only)
- Diagnostics
- Firmware Upgrade
- Upgrading with Flash EPROM
- Kernel Mode
- Operation Modes of the DTE Interface
- AT Commands Description
- Basic 'AT' Command Set
- Extended 'AT&' Command Set
- Extended 'AT*' Command Set
- Viewing and Setting S-Registers
- S-Register Descriptions
- Basic S-Registers 'ATSn=x'
- Extended S-Registers "ATSn=x"
- 'ATXn' Result Code Option Table