ZyXEL Communications IES-708-22A User Manual
Page 91
Chapter 9 User Account
IES-708-22A User’s Guide
91
The following table describes the labels in this screen.
Table 14 Basic Setting > User Account > Authentication
LABEL
DESCRIPTION
User account
Click this to open the User Account screen. See
Authentication Mode Select the process by which the IES-708-22A authenticates administrators.
local - Search the local database. You maintain this database in the User
Account screen.
radius - Check an external RADIUS database using the settings below.
local then radius - Search the local database; if the user name is not found,
check an external RADIUS database using the settings below.
IP
Enter the IP address of the external RADIUS server in dotted decimal notation.
Port
The default UDP port of the RADIUS server for authentication is 1812. You need
not change this value unless your network administrator instructs you to do so.
Secret
Specify a password (up to 31 alphanumeric characters) as the key to be shared
between the external RADIUS server and the IES-708-22A. This key is not sent
over the network. This key must be the same on the external RADIUS server
and the IES-708-22A.
Default Privilege
Level
Select the privilege level assigned to administrators in case the external
RADIUS database does not provide one. The privilege level determines which
screens the administrator can use. There is a high, medium or low privilege
level for each command. You can also choose to deny access to the IES-708-
22A.
Select high to allow the administrator to use all commands including the lower
privilege commands. High privilege commands include things like creating
administrator accounts, restarting the system and resetting the factory defaults.
Select middle to allow the administrator to use middle or low privilege
commands.
Select low to allow the administrator to use only low privilege commands. Low
privilege commands are read only.
Select deny to prevent the administrator from accessing the IES-708-22A.