4 route delete command, 5 route show command, 4 route delete command 50.3.5 route show command – ZyXEL Communications IES-708-22A User Manual
Page 317
Chapter 50 IP Commands
IES-708-22A User’s Guide
317
where
This command defines a new, static IP forwarding route or edits an existing one.
50.3.4 Route Delete Command
Syntax:
ras> ip route delete
where
This command removes a static, IP forwarding route.
50.3.5 Route Show Command
Syntax:
ras> ip route show
This command displays the IES-708-22A’s routing table.
An example is shown next.
=
The destination IP address of packets that this static route is to
route.
[/netmask]
=
The destination subnet mask of packets that this static route is to
route.
=
The IP address of the gateway that you want to send the packets
through.
[metric]
=
The metric (hop count) of this static route.
=
A name to identify this static route. Up to 31 English keyboard
characters. Spaces and tabs are not allowed.
default
=
Use this to configure the IES-708-22A’s default route.
=
The destination IP address of packets to which this static route
applies.
[/netmask]
=
The destination subnet mask of packets to which this static route
applies.
ras> ip route show
index dest gateway metric name
----- --------------- --------------- ------ -------------------------------
1 192.168.1.0/24 192.168.1.1 1
2 default 192.168.1.254 1