ZyXEL Communications IES-708-22A - Manual (Page 255)

Chapter 42 Commands
IES-708-22A User’s Guide
255
igmpsnoop bandwidth
delete
(STUC mode only) Delete an
entry of bandwidth budget setting
specified in field.
M/H
igmpsnoop bandwidth
port disable
(STUC mode only) Disable
bandwidth budget control for a
port
M/H
igmpsnoop bandwidth
port enable
(STUC mode only) Enable
bandwidth budget control for a
port
L/H
igmpsnoop bandwidth
port set
(STUC mode only) Set bandwidth
threshold for a port
: 1..100,000, in unit
of kbps
M/H
igmpsnoop bandwidth
port show
(STUC mode only) Show
bandwidth control setting for a
port
L/L
igmpsnoop bandwidth
set
(STUC mode only) Set bandwidth
budget for a range of multicast IP
channels specified in
field.
: 1~96
: , start
multicast IP address
: , end
multicast IP address
M/H
igmpsnoop bandwidth
show
(STUC mode only) Show
bandwidth budget for a range of
multicast IP channels
L/L
igmpsnoop igmpcount
disable
(STUC mode only) Disable IGMP
count limiting to subscriber port
H/H
igmpsnoop igmpcount
enable
(STUC mode only) Enable IGMP
count limiting to subscriber port
H/H
igmpsnoop igmpcount
set
(STUC mode only) Set IGMP
count limiting number to
subscriber port
H/H
igmpsnoop igmpcount
show
[portlist] (STUC mode only) Display IGMP
count limiting setting status on the
specified slot
M/L
igmpsnoop mvlan set
:|X>
[:
|X>...] [name]
(STUC mode only) Configures a
MVLAN entry.
H/H
igmpsnoop mvlan show (STUC mode only) Show
multicast vlans,
Include group information
M/L
igmpsnoop mvlan
disable
(STUC mode only) Turns off a
MVLAN entry.
H/H
igmpsnoop mvlan enable (STUC mode only) Turns on a
MVLAN entry.
H/H
igmpsnoop mvlan delete (STUC mode only) Removes a
MVLAN entry.
H/H
Table 89 Commands (continued)
CLASS COMMAND PARAMETERS DESCRIPTION P