ZyXEL Communications IES-708-22A - Manual (Page 249)

Chapter 42 Commands
IES-708-22A User’s Guide
249
snmp getcommunity Sets the SNMP GetRequest
community.
H/H
snmp setcommunity Sets the SNMP SetRequest
community.
H/H
snmp trapcommunity Sets the SNMP Trap community. H/H
snmp trusthost Sets the SNMP trusted host. Set
0.0.0.0 to trust all hosts.
H/H
. snmp trapdst set [] Sets the SNMP trap server and
listening port. Set 0.0.0.0 to not
send any SNMP traps.
H/H
snmp trapdst del Deletes the SNMP trap server H/H
server show Displays the device’s service
status and port numbers.
M/L
server enable Turns on a service. H/H
server disable Turns off a service. H/H
server port Sets a port for a service. H/H
client show Displays the device’s secured
client settings.
M/L
client enable Turns on a secure client. H/H
client disable Turns off a secure client. H/H
client set
ip> [[telnet] [ftp] [web]
[icmp]]
Sets a secured client set: a range
of IP addresses from which you
can manage the device and the
protocols that can be used.
H/H
syslog show Displays the syslog settings. M/L
syslog enable Turns on the syslog logging. H/H
syslog disable Turns off the syslog logging. H/H
syslog server Sets the IP address of the syslog
server.
H/H
stdio show Displays Current Stdio Timeout. L/L
stdio set Sets Current Stdio Timeout. H/H
time show Displays the system’s current
time.
L/L
time set [ [ss]] Sets the system’s time. H/H
date show Displays the system’s current
date.
L/L
date set Sets the system’s date. H/H
timeserver show Displays the system’s time server. M/L
timeserver set Sets the system to not use a time
server.
H/H
timeserver set [nosync] Sets the time service protocol,
time server’s IP address.
H/H
timeserver set
>0100~1200]> [nosync]
H/H
Table 89 Commands (continued)
CLASS COMMAND PARAMETERS DESCRIPTION P