ZyXEL Communications IES-708-22A - Manual (Page 361)

Chapter 54 Virtual Channel Management
IES-708-22A User’s Guide
361
where
This command configures how long the device stores the IP addresses of CPE devices using
2684 routed mode in the Address Resolution Protocol table.
The following example sets the device to store the IP addresses 2684 routed mode gateways in
the Address Resolution Protocol table for 500 seconds.
54.5.12 RPVC ARP Agingtime Show Command
Syntax:
ras> shdsl rpvc arp agingtime show
This command displays how long the device stores the IP addresses of 2684 routed mode
gateways in the Address Resolution Protocol table.
The following is an example.
54.5.13 RPVC ARP Show Command
Syntax:
ras> shdsl rpvc arp show
This command displays how long the device stores the IP addresses of 2684 routed mode
gateways in the Address Resolution Protocol table.
The following is an example.
54.5.14 RPVC ARP Flush Command
Syntax:
ras> shdsl rpvc arp flush
This command clears the IP addresses of 2684 routed mode gateways from the Address
Resolution Protocol table.
= The number of seconds (10~10000) the device is to keep the
Address Resolution Protocol table’s entries of IP addresses of
2684 routed mode gateways. Use 0 to disable the aging time.
ras> shdsl rpvc arp agingtime set 500
ras> shdsl rpvc arp agingtime show
rpvc aging time (sec): 600
ras> shdsl rpvc arp show
gateway ip vid mac
--------------- ---- -----------------
192.168.10.102 1 00:0d:9d:d9:43:3b