ZyXEL Communications IES-708-22A - Manual (Page 333)

Chapter 53 DSL Commands
IES-708-22A User’s Guide
333
This command assigns a specific DSL profile one or more ports.
53.1.8 DSL Port Name Command
Syntax:
ras> shdsl name
where
This command sets the name of one or more DSL port(s).
The following example sets DSL port 5 to have the name super.
53.1.9 DSL Port Tel Command
Syntax:
ras> shdsl tel
where
This command records the telephone number of a DSL subscriber’s telephone number.
= The profile that will define the settings of this port.
[pam mode] = The type of Trellis Coded Pulse Amplitude Modulation (TC-
PAM) the IES-708-22A uses.
Auto: The IES-708-22A selects the type of TC-PAM
automatically.
PAM16: The IES-708-22A uses 16-TCPAM.
PAM32: The IES-708-22A uses 32-TCPAM.
= You can specify a single DSL port <1>, all DSL ports <*> or a
list of DSL ports <1,3,5>. You can also include a range of ports
<1,5,6~8>.
= A descriptive name for the port. You can use up to 31
alphanumeric characters, hyphens (-), or underscores (_).
ras> shdsl name 5 super
= You can specify a single DSL port <1>, all DSL ports <*> or a
list of DSL ports <1,3,5>. You can also include a range of ports
<1,5,6~8>.
= A DSL subscriber’s telephone number. You can use up to 15
English keyboard characters (including spaces and hyphens).