ZyXEL Communications IES-708-22A - Manual (Page 286)

Chapter 46 IEEE 802.1Q Tagged VLAN Commands
IES-708-22A User’s Guide
286
46.4 IEEE VLAN1Q Tagged VLAN Configuration Commands
These commands allow you to configure and monitor the IEEE 802.1Q Tagged VLAN.
46.4.1 VLAN Port Show Command
Syntax:
ras> switch vlan portshow [portlist]
where
This command displays the port’s IEEE 802.1Q VLAN tag settings.
The following example shows the settings for DSL port 3.
46.4.2 VLAN PVID Command
Syntax:
ras> switch vlan pvid
where
This command sets a default VLAN ID for all untagged packets that come in through the
specified port.
The following example sets the default VID of port 1 to 200.
46.4.3 VLAN Priority Command
Syntax:
ras> switch vlan priority
[portlist] = You can specify a single port <1>, all ports <*> or a list of ports
<1,3,enet1>. You can also include a range of ports
<1,5,6~8,enet1>.
ras> switch vlan portshow 3
port pvid priority frametype
----- ---- -------- ---------
3 1 0 all
= You can specify a single port <1>, all ports <*> or a list of ports
<1,3,enet1>. You can also include a range of ports
<1,5,6~8,enet1>.
= The VLAN ID. Valid parameter range = [1 – 4094].
ras> switch vlan pvid 1 200