ZyXEL Communications IES-708-22A - Manual (Page 263)

Chapter 42 Commands
IES-708-22A User’s Guide
263
acl set (STUC mode only) Apply an acl
profile to a PVC
Max. 8 profiles per port
M/H
acl show [portlist] [ ] (STUC mode only) Show acl
profile setting for a PVC
L/L
dhcpsnoop disable (STUC mode only) Disable ip
spoofing for a port
M/H
dhcpsnoop enable (STUC mode only) Enable ip
spoofing for a port
M/H
dhcpsnoop flush (STUC mode only) Flush DHCP
snooping table for a port
M/H
dhcpsnoop show [] (STUC mode only) Display DHCP
snooping result on a port
L/L
ip
show Displays the management IP
address settings.
M/L
arp show Displays the device’s IP Address
Resolution Protocol(ARP) table.
M/L
arp flush Clears the device’s IP Address
Resolution Protocol(ARP) table.
H/H
set [/netmask] Sets the management IP address
and subnet mask.
H/H
gateway Sets the IP address of the
device’s default gateway.
H/H
route show Displays the routing table. M/L
route set [/netmask]
[metric]
Adds a routing table entry. H/H
route set default Sets the device’s default route. H/H
route delete [/netmask] Removes a routing table entry. H/H
route flush Clears the routing table. H/~
ping [count] Pings a remote host. M/L
statistics
monitor Displays hardware monitor status. M/L
shdsl show [portlist] Displays SHDSL port connection
status.
M/L
shdsl gbond [name] Displays bonding group link
status.
L/L
shdsl lineinfo Displays the info of the specified
SHDSL ports.
M/L
shdsl lineperf Displays the performance
statistics of the specified SHDSL
port.
M/L
shdsl linerate Displays the line rate. M/L
Table 89 Commands (continued)
CLASS COMMAND PARAMETERS DESCRIPTION P