ZyXEL Communications IES-708-22A - Manual (Page 305)

Chapter 48 IGMP Commands
IES-708-22A User’s Guide
305
48.5.2 IGMP Bandwidth Port Enable Command
Syntax:
ras> switch igmpsnoop bandwidth port enable
where
This command activates multicast bandwidth setting on the specified port.
48.5.3 IGMP Bandwidth Port Set Command
Syntax:
ras> switch igmpsnoop bandwidth port set
where
This command sets the bandwidth allowed for multicast traffic on the specified port(s). It does
not automatically enable it, however.
48.5.4 IGMP Bandwidth Port Show Command
Syntax:
ras> switch igmpsnoop bandwidth port show
where
This command displays the multicast bandwidth setting on the specified port(s) and whether
or not this setting is active. The following example displays the bandwidth budget for port 1.
= You can specify a single DSL port <1>, all DSL ports <*> or a
list of DSL ports <1,3,5>. You can also include a range of ports
<1,5,6~8>.
= You can specify a single DSL port <1>, all DSL ports <*> or a
list of DSL ports <1,3,5>. You can also include a range of ports
<1,5,6~8>.
= 1..100000, in units of kbps
= You can specify a single DSL port <1>, all DSL ports <*> or a
list of DSL ports <1,3,5>. You can also include a range of ports
<1,5,6~8>.
ras> switch igmpsnoop bandwidth port show 1
port enable bandwidth
------ ------ -----------
1 - 4096