ZyXEL Communications IES-708-22A - Manual (Page 371)

Chapter 55 ACL Commands
IES-708-22A User’s Guide
371
where
This command removes the specified ACL profile.
"
You cannot remove the ACL profile(s) that is currently in use.
55.1.3 ACL Profile Show Map Command
Syntax:
ras> switch acl profile showmap
where
This command displays the DSL port(s) to which the specified ACL profile is applied.
The following example displays the port mapping table for the
example ACL profile.
55.1.4 ACL Profile Show Command
Syntax:
ras> switch acl profile show []
where
= The name of the ACL profile.
= The name of the ACL profile.
ras> switch acl profile showmap test
profile: test
port type vpi vci
---- ------ --- -----
= The name of the ACL profile.