ZyXEL Communications IES-708-22A - Manual (Page 372)

Chapter 55 ACL Commands
IES-708-22A User’s Guide
372
This command lists the names of every ACL profile or displays the detailed settings of the
specified ACL profile.
55.2 ACL Assignment Commands
Use these commands to apply ACL profiles to PVCs.
55.2.1 ACL Assignment Set Command
Syntax:
ras> switch acl set
where
This command allows you to apply an ACL profile to the specified port(s). You can apply up
to eight profiles to a subscriber port.
The following example applies the ACL profile “test” to a PVC.
55.2.2 ACL Assignment Delete Command
Syntax:
ras> switch acl delete
ras> switch acl profile show test
profile test:
rule:
vlan :10
priority:2
action:
rpri :7
rate :1000
= The port number of the PVC. You can specify a single DSL port
<1>, all DSL ports <*> or a list of DSL ports <1,3,5>. You can
also include a range of ports <1,5,6~8>.
= The VPI of the PVC.
= The VCI of the PVC.
= The name of the ACL profile.
ras> switch acl set 1 0 33 test