ZyXEL Communications IES-708-22A - Manual (Page 149)

Chapter 18 IGMP
IES-708-22A User’s Guide
149
Figure 67 Advanced Application > IGMP
The following table describes the labels in this screen.
Table 36 Advanced Application > IGMP
LABEL DESCRIPTION
Bandwidth Setup (STU-C mode only) Click Bandwidth Setup to open the IGMP Bandwidth
screen where you can set up bandwidth requirements for multicast channels
(see Section 18.4 on page 150 ). You can also open the Bandwidth Port Setup
screen to set up multicast bandwidth requirements for selected ports (see
Section 18.4.1 on page 151 ).
IGMP Setup Click IGMP Setup to open the IGMP Setup screen where you can configure
IGMP settings (see Section 18.5 on page 152 ).
Filter Setup (STU-C mode only) Click Filter Setup to open the IGMP Filter Profile screen
where you can configure IGMP multicast filter profiles (see Section 18.6 on
page 153 ).
Count Setup (STU-C mode only) Click Count Setup to open the IGMP Count screen where
you can limit the number of IGMP groups a subscriber on a port can join (see
Section 18.7 on page 153 ).
IGMP Port Info Click IGMP Port Info to open the IGMP Port Info screen where you can look at
the current number of IGMP-related packets received on each port (see Section
18.8 on page 154 ).
IGMP Port Group Click IGMP Port Group to open the IGMP Port Group screen where you can
look at the current list of multicast groups each port has joined (see Section 18.9
on page 155 ).
Clear Click Clear to delete the information the IES-708-22A has learned about
multicast groups. This resets every counter in this screen.
Query This is the total number of Query packets received.
Report This is the total number of Report packets received.
Leave This is the total number of Leave packets received.
Number of IGMP
Groups
This is how many IGMP groups the IES-708-22A has identified on the local
network.
Previous
Next Click one of these buttons to show the previous/next screen if all of the
information cannot be seen in one screen.
Reload Click this button to refresh the screen.
Page X of X This identifies which page of information is displayed and the total number of
pages of information.
The first table displays the names of the fields. The subsequent tables show the
settings of the IGMP groups.