ZyXEL Communications IES-708-22A - Manual (Page 347)

Chapter 54 Virtual Channel Management
IES-708-22A User’s Guide
347
54.2.3 Delete Virtual Channel Profile Command
Syntax:
ras> shdsl vcprofile delete
where
You cannot delete a virtual channel profile that is assigned to any of the DSL ports. Assign a
different profile to any DSL ports that are using the profile that you want to delete, and then
you can delete the profile.
The following example deletes the silver virtual channel profile.
54.3 PVC Channels
Channels (also called Permanent Virtual Circuits or PVCs) let you set priorities for different
services or subscribers. You can define up to eight channels on each DSL port and use them
for different services or levels of service. You set the PVID that is assigned to untagged frames
received on each channel. You also set an IEEE 802.1p priority for each of the PVIDs. In this
way you can assign different priorities to different channels (and consequently the services
that get carried on them or the subscribers that use them). Use the following commands to
define channels.
54.3.1 PVC Show Command
Syntax:
ras> shdsl pvc show [ [ ]]
where
This command allows you to display the PVC parameters of the specified DSL port(s) or all of
the DSL ports if you do not specify any.
= The name of the virtual channel profile (up to 31 English
keyboard characters). You cannot delete the DEFVAL or
DEFVAL_VC profiles.
ras> shdsl vcprofile delete silver
= You can specify a single DSL port <1>, all DSL ports <*> or a
list of DSL ports <1,3,5>. You can also include a range of ports
<1,5,6~8>.
[ ] = The VPI and VCI of an individual PVC.