ZyXEL Communications IES-708-22A - Manual (Page 257)

Chapter 42 Commands
IES-708-22A User’s Guide
257
rstp maxage (STUC mode only) Set system
rstp’s max age.
H/H
rstp fwdelay (STUC mode only) Set system
rstp’s forward delay time.
H/H
rstp port show (STUC mode only) Display enet
port rstp status.
M/L
rstp port enable (STUC mode only) Set enet port
to enable rstp.
H/H
rstp port disable (STUC mode only) Set enet port
to disable rstp.
H/H
rstp port priority (STUC mode only) Set enet port’s
rstp priority.
H/H
rstp port pathcost (STUC mode only) Set enet port’s
rstp pathcost.
H/H
dhcprelay show (STUC mode only) Displays
DHCP relay settings.
L/L
dhcprelay enable (STUC mode only) Turns on
DHCP relay.
M/H
dhcprelay disable (STUC mode only) Turns off
DHCP relay.
M/H
dhcprelay server set
[]
(STUC mode only) Set DHCP
server IP address where the
DHCP request will forward to
: VLAN
< primary-server >: IP address for
primary server
< secondary-server >: IP address
for secondary server
Maximum 32 entries can be
configured.
Default: (empty list)
M/H
dhcprelay server delete [] (STUC mode only) Delete DHCP
server for 1 VLAN
M/H
dhcprelay server active (STUC mode only) Activate
primary or secondary DHCP
server for 1 VLAN
M/H
dhcprelay relaymode (STUC mode only) : auto,
both
M/H
dhcprelay option82
enable
(STUC mode only) Turns on the
DHCP relay agent information
(Option 82) feature.
M/H
dhcprelay option82
disable
(STUC mode only) Turns off the
DHCP relay agent information
(Option 82) feature.
M/H
dhcprelay option82 set (STUC mode only) Adds the
specified information for the relay
agent.
M/H
dhcprelay opt82sub2
enable
(STUC mode only) Turns on
option 82 sub-option 2
M/H
Table 89 Commands (continued)
CLASS COMMAND PARAMETERS DESCRIPTION P