Initial configuration, 1 initial configuration overview, 2 initial configuration – ZyXEL Communications IES-708-22A User Manual

Page 65: Chapter 5 initial configuration, Figure 16 ip setup, Initial configuration (65)

IES-708-22A User’s Guide

H A P T E R

Initial Configuration

This chapter describes initial configuration for the IES-708-22A. See

Chapter 57 on page 387

for various default settings of the IES-708-22A.

5.1 Initial Configuration Overview

This chapter shows what you first need to do to provide service to DSL subscribers.

5.2 Initial Configuration

This chapter uses the web configurator for initial configuration. See the CLI chapters for
information on the commands. Use Internet Explorer 6 and later versions with JavaScript
enabled.

1 Log in to the web configurator. See

Section 4.3 on page 57

for instructions.

2 In the navigation panel, click Basic Setting > IP Setup. The IP Setup screen appears.

Figure 16 IP Setup

3 Use this screen to change the IP address, subnet mask, and default gateway IP address

for your network. Apply the settings.