ZyXEL Communications IES-708-22A User Manual
Page 260

Chapter 42 Commands
IES-708-22A User’s Guide
260
dot1x radius ip
(STUC mode only) Set Radius
server IP.
H/H
dot1x radius port
(STUC mode only) Set Radius
server port.
H/H
dot1x radius secret
(STUC mode only) Set Radius
server secret.
H/H
dot1x profile show
(STUC mode only) Display
accounts for profile mode.
M/L
dot1x profile set
(STUC mode only) Set account
and password for profile mode.
H/H
dot1x profile delete
(STUC mode only) Remove
account for profile mode.
H/H
enet show
Displays the Ethernet port
settings.
M/L
enet speed
<100copper|10copper|au
to>
Sets the Ethernet port(s)
connection speed.
H/H
enet name
Sets the Ethernet port(s) name.
H/H
enet enable
Turns on the specified Ethernet
port(s).
H/H
enet disable
Turns off the specified Ethernet
port(s).
H/H
enet reset
Reset the ENET interface.
H/H
smcast show
Display all MAC addresses joined
to DSL ports.
M/L
smcast set
Use join/leave to add/ remove
multicast MAC addresses on
specified DSL ports, a range of
DSL ports or all DSL ports. MAC
example: 01005E010203
H/H
smcast delete
Removes a static multicast filter
entry by deleting the associated
MAC address.
H/H
isolation show
(STUC mode only) Displays the
subscriber isolation feature’s
current setting.
M/L
isolation enable
(STUC mode only) Turns the
subscriber isolation feature on.
H/H
isolation disable
(STUC mode only) Turns the
subscriber isolation feature off.
H/H
isolation daisychain
(STUC mode only) Set switch
mode to daisychain mode
H/H
isolation standalone
(STUC mode only) Set switch
mode to standalone mode (STUR
mode is default enabled as
isolation standalone mode)
H/H
dscp show
[portlist]
(STUC mode only) Displaying per
port DSCP setting
L/L
Table 89 Commands (continued)
CLASS
COMMAND
PARAMETERS
DESCRIPTION
P