ZyXEL Communications IES-708-22A - Manual (Page 251)

Chapter 42 Commands
IES-708-22A User’s Guide
251
enable Turns on the specified SHDSL
ports.
M/H
disable Turns off the specified SHDSL
ports.
M/H
gbond set (STUC mode only) Create a stuc
mode bonding group.
H/H
gbond set (STUR mode only) Create a stur
mode bonding group.
H/H
gbond delete Delete a bonding group. H/H
gbond show [] Displays bonding group status. L/L
gbond port Displays which bound group the
port belongs to
L/L
profile show [profile] Displays profile contents. L/L
profile set
[annexa|annexb
2wire|4wire|mpair4
[lp_off | lp_on_cur
margin> | lp_on_wc
]]
Creates a shdsl line profile. H/H
profile delete Removes an SHDSL profile. H/H
profile map [pam
mode]
Assigns a specific profile to a
port(s).
H/H
name Sets the name of a port(s). M/L
tel Records an SHDSL port(s)
subscriber’s telephone number.
M/L
loopback Performs an OAMF5 loopback
test.
H/H
vcprofile show [vcprofile] Shows a virtual channel profile’s
contents.
L/L
vcprofile set Creates a UBR or CBR virtual
channel profile (with
encapsulation).
H/H
vcprofile set Creates a VBR virtual channel
profile (with encapsulation).
H/H
vcprofile delete Removes a virtual channel profile. H/H
pvc show [ [ ]] Displays PVC settings. M/L
pvc set
>
vcprofile[,US vcprofile]>
Creates or modifies a PVC
setting.
H/H
pvc delete Removes a PVC setting. H/H
ppvc show [ [ ]] (STUC mode only) Display priority
PVC settings
M/L
Table 89 Commands (continued)
CLASS COMMAND PARAMETERS DESCRIPTION P