ZyXEL Communications IES-708-22A - Manual (Page 318)

Chapter 50 IP Commands
IES-708-22A User’s Guide
318
50.3.6 ARP Show Command
Syntax:
ras> ip arp show
This command displays the IES-708-22A’s IP Address Resolution Protocol table. This is the
list of IP addresses and matching MAC addresses that the IES-708-22A has resolved.
An example is shown next.
50.3.7 ARP Flush Command
Syntax:
ras> ip arp flush
This command clears the IES-708-22A’s IP Address Resolution Protocol table.
50.4 Statistics IP Command
Syntax:
ras> statistics ip
This command shows the statistics for the CPU IP traffic.
An example is shown next.
The following table explains these counters.
ras> ip arp show
ip mac address
--------------- -----------------
172.23.14.254 00:0c:db:30:ac:00
172.23.15.254 00:0c:db:30:ac:00
ras> statistics ip
[Ethernet]
inet : 172.23.14.253 netmask: 0.0.0.0
broadcast: 172.23.255.255 mtu: 1500
in octet : 10728504 in unicast : 738 in multicast : 232488
in discard : 0 in error : 0 in unknown proto: 0
out octet : 41361 out unicast: 861 out multicast : 0
out discard: 0 out error : 0
Table 92 Statistics IP Command
LABEL DESCRIPTION
inet This field displays the IES-708-22A’s IP address in the network.
netmask This field displays the subnet mask of the network.
broadcast This field displays the broadcast address in the network.