Table 100 standards supported – ZyXEL Communications IES-708-22A User Manual
Page 391

Chapter 57 Product Specifications
IES-708-22A User’s Guide
391
The following list, which is not exhaustive, illustrates the standards supported in the IES-708-
22A.
Max Rate
2304 Kbps
Min Rate
192 Kbps
Annex Mode
Annex B
Wire Pair
2-wire
Line Probe
On
Current Condition SNR Margin
0 dB
Worst Case SNR Margin
0 dB
Virtual Channel Default
Settings
A
.
Super channel:
Enabled
VPI:
0
VCI:
33
VC Profile:
DEFVAL (factory default)
Default VC Profile Settings
DEFVAL Profile Settings
Multiplexing: LLC-based
Traffic Class:
UBR
PCR: 300000
cells/second
CDVT: 0
VC Profile:
DEFVAL_VC
Multiplexing: VC-based
Traffic Class:
UBR
PCR: 300000
cells/second
CDVT: 0
Default IGMP Filter Profile
Settings
The DEFVAL IGMP filter profile is assigned to all of the DSL ports
by default. It allows a port to join all multicast IP addresses
(224.0.0.0~239.255.255.255).
A.
The IES-708-22A DSL ports’ PVCs use ATM Adaptation Layer (AAL) 5.
Table 100 Standards Supported
STANDARD
DESCRIPTION
RFC 867
Daytime Protocol
RFC 868
Time Protocol.
RFC 1112
IGMP v1
RFC 1157
SNMPv1: Simple Network Management Protocol version 1
RFC 1213
SNMP MIB II
RFC 1305
Network Time Protocol (NTP version 3)
RFC 1483
Multiprotocol Encapsulation over ATM Adaptation Layer 5
RFC 1493
Bridge MIB
Table 99 Default Settings (continued)