Virtual channel management, 1 virtual channel management overview, 2 virtual channel profile commands – ZyXEL Communications IES-708-22A User Manual
Page 345: 1 show virtual channel profile command, 2 set virtual channel profile command, Chapter 54 virtual channel management, Virtual channel management (345)
IES-708-22A User’s Guide
345
C
H A P T E R
54
Virtual Channel Management
This chapter shows you how to use commands to configure virtual channels.
54.1 Virtual Channel Management Overview
See
for background information on virtual channels and ATM QoS.
54.2 Virtual Channel Profile Commands
Use the following commands to configure virtual channel profiles.
54.2.1 Show Virtual Channel Profile Command
Syntax:
ras> shdsl vcprofile show [profile]
where
Displays the settings of the specified virtual channel profile (or all of them if you do not
specify one).
54.2.2 Set Virtual Channel Profile Command
Syntax:
ras> shdsl vcprofile set
ras> shdsl vcprofile set
where
[profile]
=
The name of the virtual channel profile (up to 31 English
keyboard characters).
=
The name of the virtual channel profile (up to 31 English
keyboard characters). You cannot change the name of the
DEFVAL or DEFVAL_VC profiles.
=
The type of encapsulation (vc or llc).