ZyXEL Communications IES-708-22A - Manual (Page 128)

Chapter 14 xDSL Profiles Setup
IES-708-22A User’s Guide
128
Figure 57 Basic Setting > xDSL Profiles Setup > IGMP Filter Profile
The following table describes the labels in this screen.
Table 28 Basic Setting > xDSL Profiles Setup > IGMP Filter Profile
LABEL DESCRIPTION
Port Profile Click Port Profile to configure port profiles and assign them to individual ports
(see Section 14.3 on page 118 ).
VC Profile Click VC Profile to open the VC Profile screen where you can configure virtual
channel profiles (see Section 14.7 on page 123 ).
Alarm Profile Click Alarm Profile to open the Alarm Profile screen where you can configure
limits that trigger an alarm when exceeded (see Section 14.8 on page 124 )
Index This is the number of the IGMP filter profile. Click a profile’s index number to
edit the profile. You cannot edit the DEFVAL profile.
Name This name identifies the IGMP filter profile.
Delete Select the Delete check box and click Delete to remove an IGMP filter profile.
You cannot delete the DEFVAL profile.
Name Type a name to identify the IGMP filter profile (you cannot change the name of
the DEFVAL profile). You can use up to 31 English keyboard characters; spaces
are not allowed.
Start IP Enter the starting multicast IP address for a range of multicast IP addresses to
which you want this IGMP filter profile to allow access.