ZyXEL Communications IES-708-22A - Manual (Page 264)

Chapter 42 Commands
IES-708-22A User’s Guide
264
shdsl 15mperf [count <0..96>] Displays line performance
statistics for the current and
previous 15-minute periods.
M/L
shdsl 1dayperf Displays line performance
statistics for the current and
previous 24 hours.
M/L
igmpsnoop info [clear] Display protocol packets counters
& number of learned groups
L/L
igmpsnoop group [ []] Display IGMP learned group
member information
L/L
igmpsnoop port info [ [clear]] Display received protocol packets
counters, number of joined
groups.
L/L
igmpsnoop port group Display joined groups in this port L/L
rmon stats|history enet1|enet2 Display uplink/subtending link
RMON information
M/L
rstp (STUC mode only) M/L
vlan [vlanlist] Displays current VLANs. M/L
mac Displays current MAC address
forwarding table.
M/L
port [ ]
[clear]
This command displays and/or
erases port statistics.
M/L
dot1x [portlist] (STUC mode only) M/L
enet Displays Ethernet port settings
and statistics.
M/L
ip Displays a management port’s
status and performance data.
M/~
dhcp counter [ [clear]] (STUC mode only) Display DHCP
statistics for a port
L/L
dhcp snoop (STUC mode only) Display
snooping
L/L
config
show
[nopause]
Displays the device’s
configuration.
M/L
save Saves the current configuration. H/H
restore Reloads the factory default
configuration.
H/H
exit Ends the console or telnet
session.
L/L
Table 89 Commands (continued)
CLASS COMMAND PARAMETERS DESCRIPTION P