ZyXEL Communications IES-708-22A - Manual (Page 259)

Chapter 42 Commands
IES-708-22A User’s Guide
259
mac count enable (STUC mode only) Turns on the
MAC address count filter for an
DSL port(s).
H/H
mac count disable (STUC mode only) Turns off the
MAC address count filter for an
DSL port(s).
H/H
mac count set (STUC mode only) Sets the MAC
address count filter for an DSL
port(s).
H/H
mac filter show [portlist] (STUC mode only) Displays MAC
filter settings.
M/L
mac filter enable [portlist] (STUC mode only) Turns on the
MAC filter.
H/H
mac filter disable [portlist] (STUC mode only) Turns off the
MAC filter.
H/H
mac filter mode (STUC mode only) Sets the MAC
filter to accept or deny.
H/H
mac filter set [
...]
(STUC mode only) Adds a MAC
filter MAC entry on an DSL
port(s).
H/H
mac filter delete [
...]
(STUC mode only) Removes a
MAC filter MAC entry on an DSL
port(s).
H/H
pktfilter show [portlist] (STUC mode only) Display packet
filter settings.
M/L
pktfilter set (STUC mode only) Set packet
filter for port
H/H
pktfilter pppoeonly (STUC mode only) Set packet
filter to pppoe only for port.
H/H
dot1x show [portlist] (STUC mode only) Display dot1x
settings.
M/L
dot1x enable (STUC mode only) Turn on dot1x. H/H
dot1x disable (STUC mode only) Turn off dot1x. H/H
dot1x auth (STUC mode only) Set
authentication method to profile or
radius.
H/H
dot1x port enable (STUC mode only) Turn on dot1x
on port.
H/H
dot1x port disable (STUC mode only) Turn off dot1x
on port.
H/H
dot1x port control (STUC mode only) Set port
authentication status.
H/H
dot1x port reauth (STUC mode only) Turn on or turn
off port to do reauthentication.
H/H
dot1x port peroid (STUC mode only) Set port reauth
period.
H/H
dot1x radius show (STUC mode only) Display radius
server settings.
M/L
Table 89 Commands (continued)
CLASS COMMAND PARAMETERS DESCRIPTION P