ZyXEL Communications IES-708-22A User Manual
Page 256
Chapter 42 Commands
IES-708-22A User’s Guide
256
igmpsnoop mvlan group
set
(STUC mode only) Create a
multicast to VLAN translation
entry.
up to 16 entries
Note: IP address in each entry
should be disjointed
H/H
igmpsnoop mvlan group
delete
(STUC mode only) Delete a
multicast to VLAN translation
entry.
H/H
igmpsnoop mvlan group
show
(STUC mode only) Show a
multicast to VLAN translation
entry.
M/L
igmpfilter set
(STUC mode only) Sets a DSL
port(s) to use an IGMP filter
profile.
H/H
igmpfilter show
[portlist]
(STUC mode only) Displays which
IGMP filter profile an DSL port(s)
is using.
M/L
igmpfilter profile set
(STUC mode only) Configures an
IGMP filter profile.
H/H
igmpfilter profile delete
(STUC mode only) Removes an
IGMP filter profile.
H/H
igmpfilter profile show
[name]
(STUC mode only) Displays an
IGMP filter profile’s settings.
M/L
queuemap show
Displays the system’s priority level
to physical queue mapping.
M/L
queuemap set
Maps a priority level to a physical
queue.
H/H
garptimer show
(STUC mode only) Display the
system’s garp settings.
M/L
garptimer join
(STUC mode only) Set system’s
garp join time.
H/H
garptimer leave
(STUC mode only) Set system’s
garp leave time.
H/H
garptimer leaveall
(STUC mode only) Set system’s
garp leaveall time.
H/H
rstp show
(STUC mode only) Display the
system’s rstp settings.
M/L
rstp enable
(STUC mode only) Turn system’s
rstp on.
H/H
rstp disable
(STUC mode only) Turn system’s
rstp off.
H/H
rstp priority
(STUC mode only) Set system
rstp’s priority.
H/H
rstp hellotime
(STUC mode only) Set system
rstp’s hello time.
H/H
Table 89 Commands (continued)
CLASS
COMMAND
PARAMETERS
DESCRIPTION
P