Yaskawa L1000E AC Drive Technical Manual for CIMR-LE Models for Elevator Applications - Manual (Page 60)

3.5 Terminal Cover
60 YASKAWA ELECTRIC SIEP YAIL1E 01A YASKAWA AC Drive L1000E Technical Manual
2. Pull forward on the terminal cover to free it from the drive.
Figure 3.6
Figure 3.7 Removing the Terminal Cover
■ Reattaching the Terminal Cover
Models 2A0018 to 2A0094 and 4A0009 to 4A0049
Power lines and signal wiring should pass through the opening provided. Refer to Wiring the Main Circuit Terminal on
page 72 and Wiring the Control Circuit Terminal on page 76 for details on wiring.
Reattach the terminal cover after completing the wiring to the drive and other devices.
Figure 3.7
Figure 3.8 Reattaching the Terminal Cover
Models 2A0106 to 2A0432 and 4A0056 to 4A0260
After wiring the terminal board and other devices, double-check connections and reattach the terminal cover. Refer to
Wiring the Main Circuit Terminal on page 72 and Wiring the Control Circuit Terminal on page 76 for details on
wiring.
Figure 3.8
Figure 3.9 Reattaching the Terminal Cover
YEA_common
Connect ground wiring first,
followed by the main circuit,
and then wire the control circuit.
Power lines and signal wiring
exit through the opening provided.
YEA_common
Connect ground wiring first,
followed by the main circuit,
and then wire the control circuit.
YEA_common