Yaskawa PC NC - Manual (Page 72)

3 - 15
YASNAC PCNC Operating Manual Chapter 3: HMI Process Operation
FIGURE 3.1.9.2. The Expanded Calculator Dialog
Incrementing a number:
• Select the number field that contains the number to be incremented.
• Display the calculator by pressing the Calc button .
• Pressing the + key, and then enter the increment amount.
• Press the =/P/C key. This will compute the result, put the result in the number field and
close the calculator.
Raising a number to a power:
• Display the calculator by pressing the Calc button .
• Press the expand button (>) to enlarge the calculator and show expanded functionality.
• Enter "2." using the calculator’s keypad. "2." is now shown in the display.
• Press the y^x button. A "^" appears in the lower left corner.
• Enter "3" using the calculator’s keypad. "3" is now shown in the display. In the upper left
corner there is a small "2.", and in the lower left corner there is a "^".
• Press the "=" button. "8." is now shown in the display.
Using the Get key:
• Change to the Setup:Workshift screen and select a cell in the grid. The border of the
selected cell becomes a black line. Type in “7.” and hit the Enter key. Touch outside the
grid to deselect the cell.
• Display the calculator by pressing the Calc button
.
• Enter "2." using the calculator’s keypad. "2." is now shown in the display.
• Press the + button. A "+" appears in the lower left corner of the display.
• Enter "3" using the calculator’s keypad. "3" is now shown in the display. In the upper left
corner there is a small "2.", and in the lower left corner there is a "+".
• Select the grid cell with the value of "7.000" from the Setup:Workshift screen. The border
of the selected cell becomes a black line.