Yaskawa PC NC - Manual (Page 135)

3 - 78
YASNAC PCNC Operating Manual Chapter 3: HMI Process Operation
3.7.11 Solid Tap Screen
FIGURE 3.7.11.1. The Solid Tap Screen
The Machine Setup:Solid Tap screen is used to adjust the gains in order to minimize error for the
solid tap process. The left side of the screen displays real-time data about solid tap performance.
These fields will show 0 if not doing solid tap. The Synchronization Offset fields on the right
half of the screen are editable by any user at MTB level or higher. Parameter editing must be
enabled on the Utilities:Login screen to make any changes.