Yaskawa PC NC - Manual (Page 107)

3 - 50
YASNAC PCNC Operating Manual Chapter 3: HMI Process Operation
If a program is no longer being used, the Close button will remove it from both the Pro-
gram:List screen and the drop-down menu in the Program:Editor screen.
The Copy This... button makes a copy of the selected program and stores it in the speci-
fied directory using the specified file name.
Using the Display toggle, the Program:List screen can be
configured to show either the Directory where a program
is stored, as in Figure 3.4.3.1 on page 49, or the Comment
associated with the program, as in Figure 3.4.3.2 on
page 50.
There are several parameters that control whether macro programs (programs in the 8000 and
9000 ranges) can be displayed or edited. These parameters are listed in Table 3.4.1.1 on page 40.
The effects of combining these parameters are outlined in Table 3.4.1.2 on page 40 and Table 10
on page 38.
.
FIGURE 3.4.3.2. List Screen showing comments