Yaskawa PC NC - Manual (Page 106)

3 - 49
YASNAC PCNC Operating Manual Chapter 3: HMI Process Operation
• Reopen the file by selecting it in the Program:File screen and clicking the Edit This
button.
• Note that the changes made in the first step of this example were not saved.
3.4.3 List Screen
The Program:List screen, shown in Figure 3.4.3.1 on page 49, displays all the files that can be
edited or executed. The current program is indicated with the icon , while programs that can
be edited are indicated by . A maximum of 9 programs can be open at a time, and once this
limit is exceeded, the oldest is automatically closed when a new one is opened. Programs that are
automatically opened (such as executed subprograms) will not appear in this list.
FIGURE 3.4.3.1. The List Screen
The current program may be set by clicking the Run This button while an item in the list
is highlighted. This will also cause the Run:Production screen to be displayed. A warning
dialog will be shown if this is clicked when the selected file is on a removable or network
drive. This button is disabled if the system is not in MEM mode.
A program in the list can be edited by clicking Edit This. A program may only be viewed
if Edit Lock is ON.