Yaskawa PC NC - Manual (Page 140)

3 - 83
YASNAC PCNC Operating Manual Chapter 3: HMI Process Operation
• Go back to the Utilities:Maintenance:High Speed Cutting screen. The grid cell with the
row labeled Default and the column labeled Acceleration & Deceleration (m/s
2
) again
reads "0.123.”
3.7.15 User Install Screen
FIGURE 3.7.15.1. The User Install Screen Using Drop Down Menus
The User Install screen, shown in Figure 3.7.15.1 on page 83, is used by shop personnel to install
CNC software options. These options are divided into groups by functionality, and when the
Search switch is not checked, groups are shown in the drop down menu in the upper left corner.
When the Search switch is checked, it is possible to show only the options whose descriptions
contain a specified string. An example of this is shown in Figure 3.7.15.2 on page 84, where only
options whose descriptions contain ‘coord’ are shown. To use this feature, type a string into the
text field and hit the Enter key. Searching by Address is not enabled for this screen.