Yaskawa PC NC - Manual (Page 229)

A2 - 18
YASNAC PCNC Operating Manual Appendix 2: Alarm Tables
Alarm
No.
Description
alarm.3283 YENET1200 command time-out error has occurred (3rd-axis).
alarm.3284 YENETI200 command time-out error has occurred (4th-axis).
alarm.3285 YENET1200 command time-out error has occurred (5th-axis).
alarm.3291 YENET1200 command time-out error has occurred (spindle).
alarm.3296 During sequence editing, the power is turned ON for the NC with the system number switch set in "0".
alarm.3297 Sequence data has been destroyed.
alarm.3299 Communication error has occurred in the YENET1200 (I/O).
alarm.3301 Excessively large current is supplied to the servo pack main circuit (1st-axis).
alarm.3302 Excessively large current is supplied to the servo pack main circuit (2nd-axis).
alarm.3303 Excessively large current is supplied to the servo pack main circuit (3rd-axis).
alarm.3304 Excessively large current is supplied to the servo pack main circuit (4th-axis).
alarm.3305 Excessively large current is supplied to the servo pack main circuit (5th-axis).
alarm.3311 Servo pack MCCB has been tripped (X-axis).
alarm.3312 Servo pack MCCB has been tripped (Y-axis).
alarm.3313 Servo pack MCCB has been tripped (Z-axis).
alarm.3314 Servo pack MCCB has been tripped (4th-axis).
alarm.3315 Servo pack MCCB has been tripped (5th-axis).
alarm.3321 An error has occurred with the servo pack regeneration resistor (X-axis).
alarm.3322 An error has occurred with the servo pack regeneration resistor (Y-axis).
alarm.3323 An error has occurred with the servo pack regeneration resistor (Z-axis).
alarm.3324 An error has occurred with the servo pack regeneration resistor (4th-axis).
alarm.3325 An error has occurred with the servo pack regeneration resistor (5th-axis).
alarm.3331 DC voltage in the servo pack main circuit is abnormally high (1st-axis).
alarm.3332 DC voltage in the servo pack main circuit is abnormally high (2nd-axis).
alarm.3333 DC voltage in the servo pack main circuit is abnormally high (3rd-axis).
alarm.3334 DC voltage in the servo pack main circuit is abnormally high (4th-axis).
alarm.3335 DC voltage in the servo pack main circuit is abnormally high (5th-axis).
alarm.3381 Communication error has occurred in the YENET 1200 (1st-axis).
alarm.3382 Communication error has occurred in the YENET 1200 (2nd-axis).