Yaskawa PC NC - Manual (Page 123)

3 - 66
YASNAC PCNC Operating Manual Chapter 3: HMI Process Operation
3.7.4 Configuration Screen
FIGURE 3.7.4.1. Configuration Screen - NC Configuration
The NC Configuration tab of the Configuration screen, shown in Figure 3.7.4.1 on page 66, is
provided for maintenance purposes and is not used for daily operation. This screen displays such
non-editable information as system numbers and software versions. The Boot Up .BMP file is
editable, and can be set by clicking the Change Bitmap button. This button is only enabled
for users with access levels of MTB or higher.