Kofax Getting Started with Ascent Xtrata Pro - Manual (Page 517)

Chapter 6
498 Ascent Xtrata Pro User's Guide
Add
Click this button to add an additional subfield.
Delete
Click this button to remove the currently selected subfield.
Rename
Click this button to change the subfield’s name.
Auto Mapping
By default, a subfield is automatically created and mapped to the zones. If you
have deleted the subfield and want to automatically create a new subfield, then
click this button. The mapping on this tab is intended to be used for zones that
were added manually and where the subfields were not automatically generated.
Zone/Subfield Mapping
The mapping is normally done automatically when you draw a zone in the viewer.
For manually assigning a subfield to a zone, select a zone in the panel and select the
subfield you want to use from the list in the Subfield column. Multiple zones may be
mapped to the same subfield.
Zone Locator Properties Dialog Box – OCR Profiles Tab
Use the OCR Profiles tab to manage the OCR profiles used by the zone locator.