Kofax Getting Started with Ascent Xtrata Pro - Manual (Page 504)

Project Builder User Interface
Ascent Xtrata Pro User's Guide 485
Locators
This area shows all the available and selected locators.
Available Locators
This is a list of all available locators. Select any locator from this list and click the
right arrow button to move the locator to the selected locators list.
Selected Locators
This is a list of all the locators that have been selected. Select any locator from the
list and click the left arrow button to move the locator back to the Available
Locators list. You can use the up and down arrow buttons to move items within
the list
Maximum Alternatives
Enter a number to limit the maximum number of alternatives that should
returned by each locator.
Type
There are two types results that can obtained from the evaluator.
Best of
Select this option if the sequence of the selected locators doesn’t matter. It will
simply return the best results (which also meet the confidence threshold) among
the selected locators.
First of
Select this option if the sequence of the selected locators does matter. The first
entry for each locator that meets the confidence threshold will be in the final
result.
Threshold
Specify the threshold for the minimum confidence required for a match to be used as
alternative. This is require only in “First Of” result type.
Standard Evaluator Dialog Box – Test Tab
Use the Test Results tab to evaluate your settings.