Kofax Getting Started with Ascent Xtrata Pro - Manual (Page 405)

Chapter 6
386 Ascent Xtrata Pro User's Guide
confidence. The probability of getting misclassified documents would then be
much smaller, resulting in a higher accuracy but more rejects.
If you make the value closer to the “max. recall” side, higher confidence values
are returned for documents with low contrast. However, this might mean that
high confidence values are assigned to other classes with low contrast in the
same region of the document, which might lead to a higher error rate. In most
cases the default value of 15.0 works best.
Write Protection Password Dialog Box
Use this dialog box to change the write protection of a project.
Figure 6-60. Write Protection Password
Old password
Enter the old (current) write protection password.
New Password
Enter the new password in the password text field and re-enter it in the text field
below. The new password will only be accepted if the field entries are identical.
Buttons
The following buttons are provided for this dialog box.
OK
Click this button to save the new password and to return to the Project Settings
dialog box.