Kofax Getting Started with Ascent Xtrata Pro - Manual (Page 271)

Chapter 6
252 Ascent Xtrata Pro User's Guide
Figure 6-1. Project Builder Main Screen
The area below the main toolbar is mainly divided into three sections:
• On the left, the Project panel shows the project class tree, showing all defined
and derived classes. Additional details about the classes are shown in columns
to the right of the class names. Depending on your screen size, you may have
to scroll the contents of the panel to see these additional columns.
• The right section is divided into two main areas. The upper area is used to
show different working modes and the lower area provides different file lists,
such as those used for document training or testing.
The two vertical toolbars shown to the left of both areas are used for selecting
the different working modes (the Mode toolbar) or different file lists (the File
Lists toolbar).
The following working modes are available:
3
Classification Results – used to show the classification results of the
processed class