Kofax Getting Started with Ascent Xtrata Pro - Manual (Page 441)

Chapter 6
422 Ascent Xtrata Pro User's Guide
click this button. The mapping on this tab is intended to be used for zones that
were added manually and where the subfields were not automatically generated.
Zone/Subfield Mapping
The mapping is normally done automatically when you draw a zone in the viewer.
For manually assigning a subfield to a zone, select a zone in the panel and select the
subfield you want to use from the list in the Subfield column. Multiple zones may be
mapped to the same subfield.
Advanced Zone Locator Properties Dialog Box – Test Results Tab
Use the Test Results tab to evaluate your settings.
Figure 6-81. Advanced Zone Locator Properties - Test Tab
Detected Alternatives
This area shows the test results, including the name of the zone, the confidence of
each field, and the text that was extracted from the zone.