Kofax Getting Started with Ascent Xtrata Pro - Manual (Page 454)

Project Builder User Interface
Ascent Xtrata Pro User's Guide 435
Width
The Width of the region in mm or as a percentage. The value can be changed
manually in absolute units or by adding a percentage sign. For example choosing
30% for Width means the width of the region is always 30% of the document
width.
Height
The Height of the region in mm or as a percentage. The value can be changed
manually in absolute units or by adding a percentage sign. For example choosing
30% for Height means the height of the region is always 30% of the document
height.
Note
The changes are applied when you leave the edit mode by clicking
another field or pressing the Return key.
Buttons
Add
Click this button to insert a region in the list of regions. When the document is
displayed in the Document Viewer, the region is shown on the document.
Delete
Click this button to remove the currently selected region. You can select a region
from the list of regions or directly on the document in the Document Viewer.
Classification Locator Properties Dialog Box – Test Results Tab
Use the Test Results tab to evaluate your settings.