HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 71)

The applicable storage systems require a dual controller configuration. If
you use the system in a hub-connected environment, you must set
unique loop IDs for all connected hosts and storage systems.
For details on the micro-programs and settings information for storage
systems, which are required to use HDLM, see the HDLM Release Notes
and maintenance documentation for the storage system.
Applicable storage systems for use as boot disks:
¢
Hitachi AMS2000/AMS/WMS/SMS series
¢
Hitachi NSC55
¢
Hitachi Universal Storage Platform 100
¢
Hitachi Universal Storage Platform 600
¢
Hitachi Universal Storage Platform 1100
¢
Hitachi Universal Storage Platform V
¢
Hitachi Universal Storage Platform VM
¢
Hitachi Virtual Storage Platform
¢
HP StorageWorks P9500 Disk Array
¢
HUS100 Series
¢
HUS VM
¢
XP10000/XP12000/XP20000/XP24000
¢
SVS
HBAs
For details on the applicable HBAs, see the HDLM Release Notes.
When Handling Intermediate Volumes Managed by Hitachi RapidXchange
When you exchange data by using intermediate volumes managed by Hitachi
RapidXchange, the following version of File Access Library and File Conversion
Utility (FAL/FCU) is required:
• For Lightning 9900V Series
01-03-56/20 or later
• Hitachi USP series
01-04-64/21 or later
• Universal Storage Platform V/VM series
01-05-66/23 or later
• VSP G1000 series
01-07-68/00 or later
For details about Hitachi RapidXchange, see the manual File Access Library &
File Conversion Utility for Solaris HP-UX AIX Windows Tru64 UNIX NCR SVR4
DYNIX/ptx Linux.
Creating an HDLM Environment
3-5
Hitachi Dynamic Link Manager (for Solaris) User Guide