HP Hitachi Dynamic Link Manager Software Licenses Instruction Manuals and User Guides
We have 7 Instruction Manuals and User Guides for Hitachi Dynamic Link Manager Software Licenses HP
Manuals 
| Recognized languages: | English |
|---|---|
| Pages: | 646 |
| Size: | 4.04 MB |
Show table of contents
Document Outline
- (for Solaris) User Guide
- Contents
- Preface
- Overview of HDLM
- HDLM Functions
- Devices Managed by HDLM
- System Configuration
- LU Configuration
- Program Configuration
- Position of the HDLM Driver and HDLM Device
- Logical Device Files for HDLM Devices
- Distributing a Load Using Load Balancing
- Performing Failovers and Failbacks Using Path Switching
- Intermittent Error Monitoring (Functionality When Automatic Failback Is Used)
- Detecting Errors by Using Path Health Checking
- Distributing a Load by Using the Dynamic I/O Path Control Function
- Error Management
- Collecting Audit Log Data
- Integrated HDLM management using Global Link Manager
- Cluster Support
- Creating an HDLM Environment
- HDLM System Requirements
- Hosts and OSs Supported by HDLM
- Storage Systems Supported by HDLM
- Cluster Software Supported by HDLM
- Volume Manager Supported by HDLM
- Combinations of Cluster Software and Volume Managers Supported by HDLM
- Virtualization Environments Supported by HDLM
- Memory and Disk Capacity Requirements
- Number of LUs and Paths Supported in HDLM
- Flow for Creating an HDLM Environment
- HDLM Installation Types
- Notes on Creating an HDLM Environment
- Installing HDLM
- Preparations for a New Installation of HDLM
- Preparation for Performing an Unattended Installation of HDLM
- Performing a New Installation of HDLM (When Solaris Cluster Is Not Being Used)
- Performing a New Installation of HDLM (When Solaris Cluster Is Being Used)
- Using the HDLM Device Unconfiguration Function When Performing a New Installation of HDLM
- Preparations for an Upgrade Installation or Re-installation of HDLM
- Performing an Upgrade Installation or Re-installation of HDLM
- Installing HDLM in an LDoms Environment
- Configuring a Boot Disk Environment
- Configuring a Boot Disk Environment for a ZFS File System
- Boot Disk Environment that uses a ZFS File System
- Creating a ZFS Boot Disk Environment (for Solaris 10)
- Creating a ZFS Boot Disk Environment (for Solaris 11)
- Migrating from a ZFS Boot Disk Environment to the Local Boot Disk Environment (for Solaris 10)
- Migrating from a ZFS Boot Disk Environment to the Local Boot Disk Environment (for Solaris 11)
- Migrating from a Boot Disk Environment to the Local Boot Disk Environment
- Configuring a Mirrored Boot Disk Environment Incorporating SVM
- Checking the Path Configuration
- Setting Up HDLM Functions
- Setting up Integrated Traces
- Notes on Using the Hitachi Network Objectplaza Trace Library
- Displaying the Hitachi Network Objectplaza Trace Library setup Menu
- Changing the Size of Integrated Trace Files
- Changing the Number of Integrated Trace Files
- Changing the Buffer Size Per Monitoring Interval Duration
- Adjusting the Number of Messages to Be Output Per Monitoring Interval
- Finishing the Hitachi Network Objectplaza Trace Library Settings
- Applying the Hitachi Network Objectplaza Trace Library Settings
- Creating File Systems for HDLM (When Volume Management Software Is Not Used)
- Setting Up VxVM
- Setting Up SDS
- Setting Up SVM
- Setting Up VCS
- Removing HDLM
- HDLM System Requirements
- HDLM Operation
- Notes on Using HDLM
- HDLM Operations Using Commands
- Notes on Using Commands
- Viewing Path Information
- Changing the Status of Paths
- Viewing LU Information
- Displaying Corresponding Information About an HDLM Device, sd or ssd Device, and LDEV
- Initializing Statistical Information for Paths
- Viewing and Setting Up the Operating Environment
- Viewing License Information
- Updating the License
- Viewing HDLM Version Information
- Viewing HDLM Component Information
- Starting and Stopping the HDLM Manager
- HDLM Resident Processes
- Changing the Configuration of the HDLM Operating Environment
- Precautions Regarding Changes to the Configuration of an HDLM Operating Environment
- Overview of Reconfiguring the HDLM Device
- Adding a New Logical Unit
- Configuration Changes Such as Deleting a Logical Unit
- Adding a Path to an Existing LU by Dynamic Reconfiguration
- Deleting a Path to an Existing LU by Dynamic Reconfiguration
- Specifying Whether a Logical Unit Is To Be Managed by HDLM (When Not Using Solaris Cluster)
- Specifying Whether a Logical Unit Is To Be Managed by HDLM (When Using Solaris Cluster)
- Inheriting logical device names during storage system migration
- Troubleshooting
- Command Reference
- Overview of the HDLM Command dlnkmgr
- clear (Returns the Path Statistics to the Initial Value)
- help (Displays the Operation Format)
- offline (Places Paths Offline)
- online (Places Paths Online)
- set (Sets Up the Operating Environment)
- view (Displays Information)
- monitor (Displays I/O Information at a Specified Interval)
- add (Adds a Path Dynamically)
- delete (Deletes a Path Dynamically)
- Utility Reference
- Overview of the Utilities
- The DLMgetras Utility for Collecting HDLM Error Information
- The dlmcfgmgr Utility for Managing the HDLM Configuration
- The dlminstcomp HDLM Component Installation Utility
- The dlmlisthdev Utility for Assisting HDLM Transitions
- The dlmsetboot Utility for Assisting Configuration of an HDLM Boot Disk Environment
- The dlmsetconf Utility for Creating the HDLM Driver Configuration Definition File
- The dlmstart Utility for Configuring HDLM Devices
- The dlmvxexclude Utility for Assisting Creation of the VxVM Configuration File
- The installhdlm Utility for Installing HDLM
- installux.sh Utility for HDLM Common Installer
- The removehdlm Utility for Removing HDLM
- Messages
- Before Viewing the List of Messages
- KAPL01001 to KAPL02000
- KAPL03001 to KAPL04000
- KAPL04001 to KAPL05000
- KAPL05001 to KAPL06000
- KAPL06001 to KAPL07000
- KAPL07001 to KAPL08000
- KAPL08001 to KAPL09000
- KAPL09001 to KAPL10000
- KAPL10001 to KAPL11000
- KAPL11001 to KAPL12000
- KAPL13001 to KAPL14000
- KAPL15001 to KAPL16000
- Return Codes for Hitachi Command Suite Common Agent Component
- Sun Cluster 3.2 Commands
- Functional Differences Between Versions of HDLM
- Acronyms and abbreviations
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 716 |
| Size: | 4.01 MB |
Show table of contents
Document Outline
- (for Linux®) User Guide
- Contents
- Preface
- Overview of HDLM
- HDLM Functions
- Devices Managed by HDLM
- System Configuration
- LU Configuration
- Program Configuration
- Position of the HDLM Driver and HDLM Device
- Logical Device Files for HDLM Devices
- Distributing a Load Using Load Balancing
- Performing Failovers and Failbacks Using Path Switching
- Monitoring Intermittent Errors (Functionality When Automatic Failback Is Used)
- Detecting Errors by Using Path Health Checking
- Distributing a Load by Using the Dynamic I/O Path Control Function
- Error Management
- Collecting Audit Log Data
- Integrated HDLM management using Global Link Manager
- Cluster Support
- Creating an HDLM Environment
- HDLM System Requirements
- Hosts and OSs Supported by HDLM
- Storage Systems Supported by HDLM
- Related Products When Using Red Hat Enterprise Linux AS4/ES4
- Related Products When Using Red Hat Enterprise Linux 5
- Related Products When Using Red Hat Enterprise Linux 6
- Related Products When Using SUSE LINUX Enterprise Server 10
- Related Products When Using SUSE LINUX Enterprise Server 11
- Related Products When Using Oracle Enterprise Linux 4
- Related Products When Using Oracle Enterprise Linux 5
- Related Products When Using Oracle Unbreakable Enterprise Kernel 5
- Related Products When Using Oracle Unbreakable Enterprise Kernel 6
- Memory and Disk Capacity Requirements
- Number of LUs and Paths That Are Supported in HDLM
- Virtual Environments Supported by HDLM
- Flow for Creating an HDLM Environment
- HDLM Installation Types
- Knowledge Required Before You Install HDLM
- Notes on Creating an HDLM Environment
- Installing HDLM
- Installing HDLM for Managing Boot Disks
- Settings for LUKS
- Settings for md Devices
- Settings for LVM2
- Settings for Xen
- Settings for KVM
- Settings for Heartbeat
- Settings for Oracle RAC
- Settings for the RHCM
- Settings for VCS
- Checking the Path Configuration
- Setting Up HDLM
- The Process-specific-trace Information File
- Creating a Character-Type Device File for an HDLM Device
- Creating File Systems for HDLM (When Volume Management Software Is Not Used)
- Settings for Automatic Mounting
- Canceling the Settings for HDLM
- Operations on HDLM-Managed Devices
- Canceling the Heartbeat Settings
- Canceling the Settings for Oracle RAC
- Canceling the Settings for RHCM
- Canceling the Settings for VCS
- Canceling the Xen Settings
- Canceling the KVM Settings
- Canceling the Settings for LVM2
- Canceling the md Device Settings
- Canceling the LUKS Settings
- Removing HDLM
- Removing Hitachi Network Objectplaza Trace Library (HNTRLib2)
- HDLM System Requirements
- HDLM Operation
- Notes on Using HDLM
- Notes Common to OSs
- Notes When Using Red Hat Enterprise Linux AS4/ES4, or Oracle Enterprise Linux 4
- Notes When Using Red Hat Enterprise Linux 5, Red Hat Enterprise Linux 6, Oracle Enterprise Linux 5, Oracle Unbreakable Enterprise Kernel 5, or Oracle Unbreakable Enterprise Kernel 6
- Notes When Using SUSE LINUX Enterprise Server 10
- Notes When Using SUSE LINUX Enterprise Server 11
- Updating Kernel Packages and Applying OS Update Packages
- HDLM Operations Using Commands
- Notes on Using Commands
- Viewing Path Information
- Changing the Status of Paths
- Viewing LU Information
- Displaying Corresponding Information About an HDLM Device, SCSI Device, and LDEV
- Initializing Statistical Information for Paths
- Viewing and Setting Up the Operating Environment
- Viewing License Information
- Updating the License
- Viewing HDLM Version Information
- Viewing HDLM Component Information
- Starting and Stopping the HDLM Manager
- HDLM Resident Processes
- Reconfiguring the HDLM Operating Environment
- Notes on Using HDLM
- Troubleshooting
- Command Reference
- Overview of the HDLM Command dlnkmgr
- clear (Returns the Path Statistics to the Initial Value)
- help (Displays the Operation Format)
- offline (Places Paths Offline)
- online (Places Paths Online)
- set (Sets Up the Operating Environment)
- view (Displays Information)
- add (Adds a Path Dynamically)
- delete (Deletes a Path Dynamically)
- Utility Reference
- Overview of the Utilities
- DLMgetras Utility for Collecting HDLM Error Information
- dlmcfgmgr Utility for Managing the HDLM Configuration
- dlmchname HDLM Device Name Replacement Utility
- dlmmkinitrd Utility for Supporting a Boot Disk
- dlmpr Utility for Clearing HDLM Persistent Reservation
- dlmsetopt Utility for Setting HDLM Driver Options
- dlmstart Utility for Starting HDLM
- dlmupdatesysinit Utility for Updating System Scripts
- installgetras Utility for Collecting HDLM Installation Error Information
- installhdlm Utility for Installing HDLM
- installux.sh Utility for HDLM Common Installer
- Messages
- Before Viewing the List of Messages
- KAPL01001 to KAPL02000
- KAPL03001 to KAPL04000
- KAPL04001 to KAPL05000
- KAPL05001 to KAPL06000
- KAPL06001 to KAPL07000
- KAPL07001 to KAPL08000
- KAPL08001 to KAPL09000
- KAPL09001 to KAPL10000
- KAPL10001 to KAPL11000
- KAPL11001 to KAPL12000
- KAPL12001 to KAPL13000
- KAPL13001 to KAPL14000
- KAPL15001 to KAPL16000
- Return Codes for Hitachi Command Suite Common Agent Component
- Notes on Linux Commands and Files
- Troubleshooting Products That Use the Weak-Modules Script
- Functional Differences Between Versions of HDLM
- Functional Differences Between Version 8.0 and Versions Earlier Than 8.0
- Functional Differences Between Version 7.6 and Versions Earlier Than 7.6
- Functional Differences Between Version 7.2 and Versions Earlier Than 7.2
- Functional Differences Between Version 6.2.1 and Versions Earlier Than 6.2.1
- Functional Differences Between Version 6.1 and Versions Earlier Than 6.1
- Functional Differences Between Version 6.0 or Later and Versions Earlier Than 6.0
- Functional Differences Between Version 5.9.4 or Later and Versions Earlier Than 5.9.4
- Functional Differences Between Version 5.9.1 or Later and Versions Earlier Than 5.9.1
- Functional Differences Between Version 5.9 or Later and Versions Earlier Than 5.9
- Functional Differences Between Version 5.8 or Later and Versions Earlier Than 5.8
- Functional Differences Between Version 5.7.1 or Later and Versions Earlier Than 5.7.1
- Functional Differences Between Version 5.7.0-01 or Later and Versions Earlier Than 5.7.0-01
- Functional Differences Between Version 5.7 or Later and Versions Earlier Than 5.7
- Functional Differences Between Version 5.6.3 or Later and Versions Earlier Than 5.6.3
- Functional Differences Between Version 5.4 or Later and Versions Earlier Than 5.4
- Acronyms and abbreviations
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 712 |
| Size: | 4.00 MB |
Show table of contents
Document Outline
- User Guide for Linux®
- Contents
- Preface
- Overview of HDLM
- HDLM Functions
- Devices Managed by HDLM
- System Configuration
- LU Configuration
- Program Configuration
- Position of the HDLM Driver and HDLM Device
- Logical Device Files for HDLM Devices
- Distributing a Load Using Load Balancing
- Performing Failovers and Failbacks Using Path Switching
- Monitoring Intermittent Errors (Functionality When Automatic Failback Is Used)
- Detecting Errors by Using Path Health Checking
- Distributing a Load by Using the Dynamic I/O Path Control Function
- Error Management
- Collecting Audit Log Data
- Integrated HDLM management using Global Link Manager
- Cluster Support
- Creating an HDLM Environment
- HDLM System Requirements
- Hosts and OSs Supported by HDLM
- Storage Systems Supported by HDLM
- Related Products When Using Red Hat Enterprise Linux AS4/ES4
- Related Products When Using Red Hat Enterprise Linux 5
- Related Products When Using Red Hat Enterprise Linux 6
- Related Products When Using SUSE LINUX Enterprise Server 10
- Related Products When Using SUSE LINUX Enterprise Server 11
- Related Products When Using Oracle Enterprise Linux 4
- Related Products When Using Oracle Enterprise Linux 5
- Related Products When Using Oracle Unbreakable Enterprise Kernel 5
- Related Products When Using Oracle Unbreakable Enterprise Kernel 6
- Memory and Disk Capacity Requirements
- Number of LUs and Paths That Are Supported in HDLM
- Virtual Environments Supported by HDLM
- Flow for Creating an HDLM Environment
- HDLM Installation Types
- Knowledge Required Before You Install HDLM
- Notes on Creating an HDLM Environment
- Installing HDLM
- Installing HDLM for Managing Boot Disks
- Notes on Installing HDLM in a Boot Disk Environment
- Overview of the Procedure for Installing HDLM in a Boot Disk Environment
- Settings for Using an HDLM Device as a Boot Disk
- Upgrade Installation in an Environment Where an HDLM Device Is Used as a Boot Disk
- Settings for Using a Logical Volume (LVM2) on an HDLM Device as a Boot Disk
- Upgrade Installation in an Environment Where a Logical Volume (LVM2) on an HDLM Device Is Used as a Boot Disk
- Countermeasures for Unsuccessful Startup of the OS from an HDLM Device
- Settings for LUKS
- Settings for md Devices
- Settings for LVM2
- Settings for Xen
- Settings for KVM
- Settings for Heartbeat
- Settings for Oracle RAC
- Settings for the RHCM
- Settings for VCS
- Checking the Path Configuration
- Setting Up HDLM
- The Process-specific-trace Information File
- Creating a Character-Type Device File for an HDLM Device
- Creating File Systems for HDLM (When Volume Management Software Is Not Used)
- Settings for Automatic Mounting
- Canceling the Settings for HDLM
- Operations on HDLM-Managed Devices
- Canceling the Heartbeat Settings
- Canceling the Settings for Oracle RAC
- Canceling the Settings for RHCM
- Canceling the Settings for VCS
- Canceling the Xen Settings
- Canceling the KVM Settings
- Canceling the Settings for LVM2
- Canceling the md Device Settings
- Canceling the LUKS Settings
- Removing HDLM
- Removing Hitachi Network Objectplaza Trace Library (HNTRLib2)
- HDLM System Requirements
- HDLM Operation
- Notes on Using HDLM
- Notes Common to OSs
- Notes When Using Red Hat Enterprise Linux AS4/ES4, or Oracle Enterprise Linux 4
- Notes When Using Red Hat Enterprise Linux 5, Red Hat Enterprise Linux 6, Oracle Enterprise Linux 5, Oracle Unbreakable Enterprise Kernel 5, or Oracle Unbreakable Enterprise Kernel 6
- Notes When Using SUSE LINUX Enterprise Server 10
- Notes When Using SUSE LINUX Enterprise Server 11
- Updating Kernel Packages and Applying OS Update Packages
- HDLM Operations Using Commands
- Notes on Using Commands
- Viewing Path Information
- Changing the Status of Paths
- Viewing LU Information
- Displaying Corresponding Information About an HDLM Device, SCSI Device, and LDEV
- Initializing Statistical Information for Paths
- Viewing and Setting Up the Operating Environment
- Viewing License Information
- Updating the License
- Viewing HDLM Version Information
- Viewing HDLM Component Information
- Starting and Stopping the HDLM Manager
- HDLM Resident Processes
- Reconfiguring the HDLM Operating Environment
- Notes on Using HDLM
- Troubleshooting
- Command Reference
- Overview of the HDLM Command dlnkmgr
- clear (Returns the Path Statistics to the Initial Value)
- help (Displays the Operation Format)
- offline (Places Paths Offline)
- online (Places Paths Online)
- set (Sets Up the Operating Environment)
- view (Displays Information)
- add (Adds a Path Dynamically)
- delete (Deletes a Path Dynamically)
- Utility Reference
- Overview of the Utilities
- DLMgetras Utility for Collecting HDLM Error Information
- dlmcfgmgr Utility for Managing the HDLM Configuration
- dlmchname HDLM Device Name Replacement Utility
- dlmmkinitrd Utility for Supporting a Boot Disk
- dlmpr Utility for Clearing HDLM Persistent Reservation
- dlmsetopt Utility for Setting HDLM Driver Options
- dlmstart Utility for Starting HDLM
- dlmupdatesysinit Utility for Updating System Scripts
- installgetras Utility for Collecting HDLM Installation Error Information
- installhdlm Utility for Installing HDLM
- installux.sh Utility for HDLM Common Installer
- Messages
- Before Viewing the List of Messages
- KAPL01001 to KAPL02000
- KAPL03001 to KAPL04000
- KAPL04001 to KAPL05000
- KAPL05001 to KAPL06000
- KAPL06001 to KAPL07000
- KAPL07001 to KAPL08000
- KAPL08001 to KAPL09000
- KAPL09001 to KAPL10000
- KAPL10001 to KAPL11000
- KAPL11001 to KAPL12000
- KAPL12001 to KAPL13000
- KAPL13001 to KAPL14000
- KAPL15001 to KAPL16000
- Return Codes for Hitachi Command Suite Common Agent Component
- Notes on Linux Commands and Files
- Troubleshooting Products That Use the Weak-Modules Script
- Functional Differences Between Versions of HDLM
- Functional Differences Between Version 7.6 and Versions Earlier Than 7.6
- Functional Differences Between Version 7.2 and Versions Earlier Than 7.2
- Functional Differences Between Version 6.2.1 and Versions Earlier Than 6.2.1
- Functional Differences Between Version 6.1 and Versions Earlier Than 6.1
- Functional Differences Between Version 6.0 or Later and Versions Earlier Than 6.0
- Functional Differences Between Version 5.9.4 or Later and Versions Earlier Than 5.9.4
- Functional Differences Between Version 5.9.1 or Later and Versions Earlier Than 5.9.1
- Functional Differences Between Version 5.9 or Later and Versions Earlier Than 5.9
- Functional Differences Between Version 5.8 or Later and Versions Earlier Than 5.8
- Functional Differences Between Version 5.7.1 or Later and Versions Earlier Than 5.7.1
- Functional Differences Between Version 5.7.0-01 or Later and Versions Earlier Than 5.7.0-01
- Functional Differences Between Version 5.7 or Later and Versions Earlier Than 5.7
- Functional Differences Between Version 5.6.3 or Later and Versions Earlier Than 5.6.3
- Functional Differences Between Version 5.4 or Later and Versions Earlier Than 5.4
- Acronyms and abbreviations
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 440 |
| Size: | 2.60 MB |
Show table of contents
Document Outline
- User Guide for Windows®
- Contents
- Preface
- Overview of HDLM
- HDLM Functions
- Devices Managed by HDLM
- System Configuration
- LU Configuration
- Program Configuration
- Driver Levels of the HDLM and MPIO Drivers
- Distributing a Load Using Load Balancing
- Performing Failovers and Failbacks Using Path Switching
- Monitoring Intermittent Errors (Functionality When Automatic Failback Is Used)
- Detecting Errors by Using Path Health Checking
- Distributing a Load by Using the Dynamic I/O Path Control Function
- Dynamic Re-configuration
- Error Management
- Collecting Audit Log Data
- Integrated HDLM management using Global Link Manager
- Cluster Support
- Creating an HDLM Environment
- HDLM System Requirements
- Flow for Creating an HDLM Environment
- HDLM Installation Types
- Notes on Creating an HDLM Environment
- Installing HDLM
- Preparations for a New Installation of HDLM
- Preparations for Installing HDLM by Performing an Unattended Installation
- Performing a New Installation of HDLM on Windows Server 2003
- Performing a New Installation of HDLM on Windows Server 2008 and Windows Server 2012
- Upgrade Installation or Re-installation of HDLM
- Migrating from HDLM 5.4 or Earlier to HDLM 5.5 or Later
- Installing JRE
- Firewall Settings for Managing HDLM by Using Global Link Manager
- Checking the Path Configuration
- Setting Up HDLM
- Setting Up Integrated Traces
- Removing HDLM
- HDLM Operation
- Notes on Using HDLM
- HDLM Operations Using the HDLM GUI
- Using Commands for HDLM Operations
- Notes on Using Commands
- Viewing Path Information
- Changing the Status of Paths
- Viewing LU Information
- Initializing Statistical Information for Paths
- Viewing and Setting Up the Operating Environment
- Viewing License Information
- Updating the License
- Viewing HDLM Version Information
- Viewing HDLM Component Information
- Using the Windows Administrative Tool (Performance) to Check Path Information
- Starting and Stopping the HDLM Manager
- HDLM Resident Processes
- Reconfiguring the HDLM Operating Environment
- Troubleshooting
- Command Reference
- Utility Reference
- Overview of the Utilities
- The DLMgetras Utility for Collecting HDLM Error Information
- The dlmpr Utility for Clearing HDLM Persistent Reservations
- The dlmprsvkey Utility for Registering an HDLM Persistent Reservation Key
- The dlmchkpath Utility for Checking HDLM Paths
- The dlmhostinfo Utility for Checking HDLM Installation Information
- The installhdlm Utility for Installing HDLM
- The removehdlm Utility for Removing HDLM
- Messages
- Before Viewing the List of Messages
- KAPL01001 to KAPL02000
- KAPL02001 to KAPL03000
- KAPL03001 to KAPL04000
- KAPL04001 to KAPL05000
- KAPL05001 to KAPL06000
- KAPL07001 to KAPL08000
- KAPL08001 to KAPL09000
- KAPL09001 to KAPL10000
- KAPL10001 to KAPL11000
- KAPL11001 to KAPL12000
- KAPL12001 to KAPL13000
- KAPL13001 to KAPL14000
- KAPL15001 to KAPL16000
- Return Codes for Hitachi Command Suite Common Agent Component
- Events Output to Windows Event Logs by HDLM
- Functional Differences Between Versions of HDLM
- Functional Differences Between Version 6.6 or Later and Versions Earlier Than 6.6
- Functional Differences Between Version 6.2 or Later and Versions Earlier Than 6.2
- Functional Differences Between Version 6.0.1 or Later and Versions Earlier Than 6.0.1
- Functional Differences Between Version 6.0 or Later and Versions Earlier Than 6.0
- Functional Differences Between Version 5.9.4 or Later and Versions Earlier Than 5.9.4
- Functional Differences Between Version 5.9.1 or Later and Versions Earlier Than 5.9.1
- Functional Differences Between Versions 5.9 or Later and Versions Earlier Than 5.9
- Path Status Transition and Automatic Path Switching
- Differences in the LU Dynamic Removal Function
- Differences in the Drive Letters Displayed in Windows
- Differences in Default Values
- Differences in the Load Balancing Function in an MSCS Environment
- Acronyms and abbreviations
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 460 |
| Size: | 2.10 MB |
Show table of contents
Document Outline
- User Guide for AIX®
- Contents
- Preface
- Overview of HDLM
- HDLM Functions
- Devices Managed by HDLM
- System Configuration
- LU Configuration
- Program Configuration
- Position of the HDLM Driver and hdisk
- Distributing a Load Using Load Balancing
- Performing Failovers and Failbacks Using Path Switching
- Monitoring intermittent errors (functionality when automatic failback is used)
- Detecting errors by using path health checking
- Distributing a Load by Using the Dynamic I/O Path Control Function
- Error management
- Collecting Audit Log Data
- Integrated HDLM management using Global Link Manager
- Cluster support
- Creating an HDLM Environment
- HDLM System Requirements
- Flow for Creating an HDLM Environment
- Types of HDLM Installation
- Notes on Creating an HDLM Environment
- Installing HDLM
- Available Installation Methods
- Preparations for a New Installation of HDLM
- Performing a New Installation of HDLM
- Preparations for an Upgrade Installation or Re-installation of HDLM
- Performing an Upgrade Installation or Re-installation of HDLM
- Migrating from HDLM Version 5.8.1 or Earlier to Version 5.9 or Later
- Installing HDLM in a PowerHA 5.5 or PowerHA 6.1 Environment
- Installing HDLM in a PowerHA 7.1 Environment
- Performing an Unattended Installation of HDLM
- Checking the Path Configuration
- Setting up HDLM
- Setting up Integrated Traces
- Notes on Using the Hitachi Network Objectplaza Trace Library
- Displaying the Hitachi Network Objectplaza Trace Library setup menu
- Changing the Size of Integrated Trace Files
- Changing the Number of Integrated Trace Files
- Changing the Buffer Size Per Monitoring Interval Duration
- Adjusting the Number of Messages to be Output Per Monitoring Interval
- Finishing the Hitachi Network Objectplaza Trace Library Settings
- Applying the Hitachi Network Objectplaza Trace Library Settings
- About the Reservation Policy
- Settings for Using PowerHA
- Settings for Using GPFS
- Settings for Using Oracle RAC 10g or Oracle RAC 11g
- Settings for Using VCS
- Removing HDLM
- HDLM Operation
- Notes on Using HDLM
- Displaying Path Information
- When a Path Error Is Detected
- Storage System
- Notes on Shutting Down a Host
- Notes on Errors in a Host
- Notes on Enabling Both Primary and Secondary Volumes to Be Viewed From the Same Server
- Notes on an LVM Mirror Configuration
- Notes on When the OS Functionality in Not Available in a Boot Disk Environment
- Notes on Replicating a System
- HDLM Operations Using Commands
- Notes on Using Commands
- Viewing Path Information
- Changing the Status of Paths
- Viewing LU Information
- Displaying the Correspondences Between hdisks, OS Management Path IDs, and LDEVs
- Initializing Statistical Information for Paths
- Viewing and Setting Up the Operating Environment
- Viewing License Information
- Updating the License
- Viewing HDLM Version Information
- Viewing HDLM Component Information
- Starting and Stopping the HDLM Manager
- HDLM Resident Processes
- Changing the Configuration of the HDLM Operating Environment
- Notes on Using HDLM
- Troubleshooting
- Command Reference
- Utility Reference
- Overview of the Utilities
- DLMgetras Utility for Collecting HDLM Error Information
- dlmchpdattr Utility for Changing HDLM Default Settings
- dlmgetrasinst Utility for Collecting HDLM Installation Error Information
- dlminstcomp Utility for HDLM Component Installation
- dlmmigsts Utility for Assisting HDLM Migration
- dlmodmset Utility for Setting the HDLM Execution Environment ODM
- dlmpostrestore Utility for HDLM Restoration Support
- dlmpr Utility for Clearing HDLM Persistent Reservation
- dlmpreremove Utility for Executed Before Removing HDLM
- dlmrmdev Utility for Deleting HDLM Drivers
- installhdlm Utility for Installing HDLM
- installux.sh Utility for HDLM Common Installer
- Messages
- Before Viewing the List of Messages
- KAPL01001 to KAPL02000
- KAPL03001 to KAPL04000
- KAPL04001 to KAPL05000
- KAPL05001 to KAPL06000
- KAPL06001 to KAPL07000
- KAPL07001 to KAPL08000
- KAPL08001 to KAPL09000
- KAPL09001 to KAPL10000
- KAPL10001 to KAPL11000
- KAPL11001 to KAPL12000
- KAPL13001 to KAPL14000
- KAPL15001 to KAPL16000
- Return Codes for Hitachi Command Suite Common Agent Component
- Functional Differences Between Versions of HDLM
- Differences Between HDLM Version 5.9 or Later and Version 5.8.1 or Earlier
- Add-in HDLM Driver Module
- Simplifying the HDLM Environment Configuration and Operation Procedures by Changes to the Logical Device Files
- Changing the HDLM Environment Configuration and Operation Procedures by Changes to the Logical Device Files
- Migrating Reservation Control Settings
- Support for a Boot Disk Environment
- About Settings when Upgrading the OS
- Changing a Virtual I/O Server's Method of Recognizing Virtual SCSI Disks
- Acronyms and abbreviations
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 504 |
| Size: | 2.74 MB |
Show table of contents
Document Outline
- (for AIX) User Guide
- Contents
- Preface
- Overview of HDLM
- HDLM Functions
- Devices Managed by HDLM
- System Configuration
- LU Configuration
- Program Configuration
- Position of the HDLM Driver and hdisk
- Distributing a Load Using Load Balancing
- Performing Failovers and Failbacks Using Path Switching
- Monitoring intermittent errors (functionality when automatic failback is used)
- Detecting errors by using path health checking
- Distributing a Load by Using the Dynamic I/O Path Control Function
- Error management
- Collecting Audit Log Data
- Integrated HDLM management using Global Link Manager
- Cluster support
- Creating an HDLM Environment
- HDLM System Requirements
- Flow for Creating an HDLM Environment
- Types of HDLM Installation
- Notes on Creating an HDLM Environment
- Notes on Installing HDLM
- Notes on an Upgrade Installation or Re-installation of HDLM
- Notes on the Virtual I/O Server
- Notes on the License Key and License Key File
- Notes on Trace Files
- Notes on Storage Systems
- Notes on the Cluster
- Notes on the Automatic Failback
- Notes on the queue_depth Parameter Value for an HDLM-Managed device
- Installing HDLM
- Available Installation Methods
- Preparations for a New Installation of HDLM
- Performing a New Installation of HDLM
- Preparations for an Upgrade Installation or Re-installation of HDLM
- Performing an Upgrade Installation or Re-installation of HDLM
- Installing HDLM to the SPOT of a NIM resource
- Migrating from HDLM Version 5.8.1 or Earlier to Version 5.9 or Later
- Installing HDLM in a PowerHA 6.1 Environment
- Installing HDLM in an Environment Running PowerHA 7.1 or a Later Version
- Performing an Unattended Installation of HDLM
- Checking the Path Configuration
- Setting up HDLM
- Setting up Integrated Traces
- Notes on Using the Hitachi Network Objectplaza Trace Library
- Displaying the Hitachi Network Objectplaza Trace Library setup menu
- Changing the Size of Integrated Trace Files
- Changing the Number of Integrated Trace Files
- Changing the Buffer Size Per Monitoring Interval Duration
- Adjusting the Number of Messages to be Output Per Monitoring Interval
- Finishing the Hitachi Network Objectplaza Trace Library Settings
- Applying the Hitachi Network Objectplaza Trace Library Settings
- About the Reservation Policy
- Settings for Using PowerHA
- Settings for Using GPFS
- Settings for Using Oracle RAC 10g or Oracle RAC 11g
- Settings for Using VCS
- Removing HDLM
- HDLM Operation
- Notes on Using HDLM
- Displaying Path Information
- When a Path Error Is Detected
- Storage System
- Notes on Shutting Down a Host
- Notes on Errors in a Host
- Notes on Enabling Both Primary and Secondary Volumes to Be Viewed From the Same Server
- Notes on an LVM Mirror Configuration
- Notes on When the OS Functionality in Not Available in a Boot Disk Environment
- Notes on Replicating a System
- HDLM Operations Using Commands
- Notes on Using Commands
- Viewing Path Information
- Changing the Status of Paths
- Viewing LU Information
- Displaying the Correspondences Between hdisks, OS Management Path IDs, and LDEVs
- Initializing Statistical Information for Paths
- Viewing and Setting Up the Operating Environment
- Viewing License Information
- Updating the License
- Viewing HDLM Version Information
- Viewing HDLM Component Information
- Starting and Stopping the HDLM Manager
- HDLM Resident Processes
- Changing the Configuration of the HDLM Operating Environment
- Notes on Using HDLM
- Troubleshooting
- Command Reference
- Overview of the HDLM Command dlnkmgr
- clear (Returns the Path Statistics to the Initial Value)
- help (Displays the Operation Format)
- offline (Places Paths Offline)
- online (Places Paths Online)
- set (Sets Up the Operating Environment)
- view (Displays Information)
- add (Adds a Path Dynamically)
- delete (Deletes a Path Dynamically)
- Utility Reference
- Overview of the Utilities
- DLMgetras Utility for Collecting HDLM Error Information
- dlmchpdattr Utility for Changing HDLM Default Settings
- dlmgetrasinst Utility for Collecting HDLM Installation Error Information
- dlminstcomp Utility for HDLM Component Installation
- dlmmigsts Utility for Assisting HDLM Migration
- dlmodmset Utility for Setting the HDLM Execution Environment ODM
- dlmpostrestore Utility for HDLM Restoration Support
- dlmpr Utility for Clearing HDLM Persistent Reservation
- dlmpremkcd Utility for Preparing for a System Backup
- dlmpreremove Utility for Executed Before Removing HDLM
- dlmrmdev Utility for Deleting HDLM Drivers
- dlmrmprshkey Utility for Clearing HDLM Persistent Reservation (Shared-Host Methodology)
- installhdlm Utility for Installing HDLM
- installux.sh Utility for HDLM Common Installer
- Messages
- Before Viewing the List of Messages
- KAPL01001 to KAPL02000
- KAPL03001 to KAPL04000
- KAPL04001 to KAPL05000
- KAPL05001 to KAPL06000
- KAPL06001 to KAPL07000
- KAPL07001 to KAPL08000
- KAPL08001 to KAPL09000
- KAPL09001 to KAPL10000
- KAPL10001 to KAPL11000
- KAPL11001 to KAPL12000
- KAPL13001 to KAPL14000
- KAPL15001 to KAPL16000
- Return Codes for Hitachi Command Suite Common Agent Component
- Functional Differences Between Versions of HDLM
- Differences Between HDLM Version 5.9 or Later and Version 5.8.1 or Earlier
- Add-in HDLM Driver Module
- Simplifying the HDLM Environment Configuration and Operation Procedures by Changes to the Logical Device Files
- Changing the HDLM Environment Configuration and Operation Procedures by Changes to the Logical Device Files
- Migrating Reservation Control Settings
- Support for a Boot Disk Environment
- About Settings when Upgrading the OS
- Changing a Virtual I/O Server's Method of Recognizing Virtual SCSI Disks
- Acronyms and abbreviations
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 446 |
| Size: | 2.63 MB |
Show table of contents
Document Outline
- (for Windows®) User Guide
- Contents
- Preface
- Overview of HDLM
- HDLM Functions
- Devices Managed by HDLM
- System Configuration
- LU Configuration
- Program Configuration
- Driver Levels of the HDLM and MPIO Drivers
- Distributing a Load Using Load Balancing
- Performing Failovers and Failbacks Using Path Switching
- Monitoring Intermittent Errors (Functionality When Automatic Failback Is Used)
- Detecting Errors by Using Path Health Checking
- Distributing a Load by Using the Dynamic I/O Path Control Function
- Dynamic Re-configuration
- Error Management
- Collecting Audit Log Data
- Integrated HDLM management using Global Link Manager
- Cluster Support
- Creating an HDLM Environment
- HDLM System Requirements
- Flow for Creating an HDLM Environment
- HDLM Installation Types
- Notes on Creating an HDLM Environment
- Installing HDLM
- Preparations for a New Installation of HDLM
- Preparations for Installing HDLM by Performing an Unattended Installation
- Performing a New Installation of HDLM on Windows Server 2003
- Performing a New Installation of HDLM on Windows Server 2008 and Windows Server 2012
- Upgrade Installation or Re-installation of HDLM
- Migrating from HDLM 5.4 or Earlier to HDLM 5.5 or Later
- Installing JRE
- Firewall Settings for Managing HDLM by Using Global Link Manager
- Checking the Path Configuration
- Setting Up HDLM
- Setting Up Integrated Traces
- Removing HDLM
- HDLM Operation
- Notes on Using HDLM
- HDLM Operations Using the HDLM GUI
- Using Commands for HDLM Operations
- Notes on Using Commands
- Viewing Path Information
- Changing the Status of Paths
- Viewing LU Information
- Initializing Statistical Information for Paths
- Viewing and Setting Up the Operating Environment
- Viewing License Information
- Updating the License
- Viewing HDLM Version Information
- Viewing HDLM Component Information
- Using the Windows Administrative Tool (Performance) to Check Path Information
- Starting and Stopping the HDLM Manager
- HDLM Resident Processes
- Reconfiguring the HDLM Operating Environment
- Troubleshooting
- Command Reference
- Utility Reference
- Overview of the Utilities
- The DLMgetras Utility for Collecting HDLM Error Information
- The dlmpr Utility for Clearing HDLM Persistent Reservations
- The dlmprsvkey Utility for Registering an HDLM Persistent Reservation Key
- The dlmchkpath Utility for Checking HDLM Paths
- The dlmhostinfo Utility for Checking HDLM Installation Information
- The installhdlm Utility for Installing HDLM
- The removehdlm Utility for Removing HDLM
- Messages
- Before Viewing the List of Messages
- KAPL01001 to KAPL02000
- KAPL02001 to KAPL03000
- KAPL03001 to KAPL04000
- KAPL04001 to KAPL05000
- KAPL05001 to KAPL06000
- KAPL07001 to KAPL08000
- KAPL08001 to KAPL09000
- KAPL09001 to KAPL10000
- KAPL10001 to KAPL11000
- KAPL11001 to KAPL12000
- KAPL12001 to KAPL13000
- KAPL13001 to KAPL14000
- KAPL15001 to KAPL16000
- Return Codes for Hitachi Command Suite Common Agent Component
- Events Output to Windows Event Logs by HDLM
- Functional Differences Between Versions of HDLM
- Functional Differences Between Version 6.6 or Later and Versions Earlier Than 6.6
- Functional Differences Between Version 6.2 or Later and Versions Earlier Than 6.2
- Functional Differences Between Version 6.0.1 or Later and Versions Earlier Than 6.0.1
- Functional Differences Between Version 6.0 or Later and Versions Earlier Than 6.0
- Functional Differences Between Version 5.9.4 or Later and Versions Earlier Than 5.9.4
- Functional Differences Between Version 5.9.1 or Later and Versions Earlier Than 5.9.1
- Functional Differences Between Versions 5.9 or Later and Versions Earlier Than 5.9
- Path Status Transition and Automatic Path Switching
- Differences in the LU Dynamic Removal Function
- Differences in the Drive Letters Displayed in Windows
- Differences in Default Values
- Differences in the Load Balancing Function in an MSCS Environment
- Acronyms and abbreviations
- Glossary
- Index