HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 359)

# /opt/DynamicLinkManager/bin/dlnkmgr offline -help
offline:
Format
dlnkmgr offline [-path]
{ -hba HBAPortNumber.BusNumber | -hbaid
HBA_ID } [-s]
dlnkmgr offline [-path] { -cha -pathid AutoPATH_ID | -
chaid CHA_ID } [-s]To display I/O information for each CHA
port
dlnkmgr offline [-path] -pathid AutoPATH_ID [-
s]
dlnkmgr offline [-path] -device SCSI_Device_Name [-s]
Valid value
AutoPATH_ID { 000000 - 999999 }(Decimal)
HBA_ID { 00000 - 99999 }(Decimal)
CHA_ID { 00000 - 99999 }(Decimal)
KAPL01001-I The HDLM command completed normally. Operation
name = offline, completion time = yyyy/mm/dd hh:mm:ss
#
Reference
Executing the view operation together with standard UNIX commands
enables you to filter the path information listed for a specific HBA port or CHA
port. For details on the view operation, see view (Displays Information) on
page 6-34 .
We recommend that you execute the following command and verify the
information on the target paths before you execute the offline operation to
place offline all the paths connected to a specific HBA port or CHA port.
Example 1
The following example shows how to filter and display the information on
all paths that pass through the HBA port whose host port number is 0004
and bus number is 0000.
# /opt/DynamicLinkManager/bin/dlnkmgr view -path | grep 0004.0000
The above command will display information on all the paths that pass
through the specified HBA port.
Example 2
The following example shows how to filter and display the information on
all the paths that pass through the CHA port 0A of the Thunder 9500V
Series:
# /opt/DynamicLinkManager/bin/dlnkmgr view -path -stname | grep
9500V | grep 0A
The above command will display information pertaining to only those
paths that pass through the specified CHA port.
Command Reference
6-11
Hitachi Dynamic Link Manager (for Solaris) User Guide