HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 577)

Message
ID
Message Text Explanation
command differs from the output
of the dlnkmgr view -path
command.
Action
Check the input file, and then
retry. For details on the
dlmlisthdev utility, see
The
dlmlisthdev Utility for Assisting
HDLM Transitions on page 7-20 .
KAPL10316
-E
Could not allocate memory. Size =
aa...aa. Execute the DLMgetras
utility to collect error information,
and then contact your vendor or
maintenance company.
Details
Securing of memory failed.
aa...aa: Target memory size
Action
Contact your HDLM vendor or the
maintenance company if there is a
maintenance contract for HDLM.
KAPL10320
-E
The file format is invalid. File name
= aa...aa
Details
The file format is invalid.
aa...aa: File name
Action
Re-execute the HDLM-
configuration definition utility. If
the same message is output,
contact your HDLM vendor or
maintenance company if you have
a maintenance contract for HDLM.
For details on the dlmcfgmgr
utility, see The dlmcfgmgr Utility
for Managing the HDLM
Configuration on page 7-17 .
KAPL10328
-E
The entered value is invalid. The
HDLM-configuration definition
utility processing will now stop.
Execute the HDLM-configuration
definition utility again.
Details
Processing will stop because an
incorrect value was entered three
or more times for the message
confirming execution of the
dlmcfgmgr utility.
Action
Re-execute the dlmcfgmgr utility.
For details on the dlmcfgmgr
utility, see The dlmcfgmgr Utility
for Managing the HDLM
Configuration on page 7-17 .
KAPL10329
-E
A file could not be opened. File
name = aa...aa, Errno = bb...bb.
Refer to the Messages section of
the HDLM User's Guide for
instructions to correct this problem.
Details
The file could not be opened.
aa...aa: File name
bb...bb: Errno (decimal number)
Action
Messages
8-101
Hitachi Dynamic Link Manager (for Solaris) User Guide