HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 308)

Execution example after a path is added by the addition of an HBA port:
Check that a path for the same HBA port has been added:
36a41,44
> ### Device=ssd74 target=65664 lun=2
> ### Path=/pci@8,700000/SUNW,emlxs@1/fp@0,0/
ssd@w50060e80033a9938,2
> ### Device=ssd84 target=134012 lun=2
> ### Path=/pci@8,700000/SUNW,emlxs@1/fp@0,0/
ssd@w50060e80033a9939,2
52a61,64
> ### Device=ssd73 target=65664 lun=3
> ### Path=/pci@8,700000/SUNW,emlxs@1/fp@0,0/
ssd@w50060e80033a9938,3
> ### Device=ssd83 target=134012 lun=3
> ### Path=/pci@8,700000/SUNW,emlxs@1/fp@0,0/
ssd@w50060e80033a9939,3
Execution example after a path is added by the addition of a CHA port:
Check that a path for the same CHA port has been added:
26a31,32
> ### Device=ssd119 target=134012 lun=2
> ### Path=/pci@8,700000/SUNW,emlxs@1,1/fp@0,0/
ssd@w50060e80033a9939,2
28a35,36
> ### Device=ssd84 target=134012 lun=2
> ### Path=/pci@8,700000/SUNW,emlxs@1/fp@0,0/
ssd@w50060e80033a9939,2
34a43,44
> ### Device=ssd118 target=134012 lun=3
> ### Path=/pci@8,700000/SUNW,emlxs@1,1/fp@0,0/
ssd@w50060e80033a9939,3
36a47,48
> ### Device=ssd83 target=134012 lun=3
> ### Path=/pci@8,700000/SUNW,emlxs@1/fp@0,0/
ssd@w50060e80033a9939,3
16
.
To remove an LU from HDLM management, use a text editor to edit the
HDLM driver unconfiguration definition file (/opt/DynamicLinkManager/
config/dlmfdrv.unconf).
In the lines that define the LU that is to be removed from HDLM
management, delete the hash mark (#) in front of the LDEV property
line. Do not change anything else.
17
.
To remove an LU from HDLM management, apply the contents of the
HDLM driver unconfiguration definition file to the HDLM driver
configuration definition file.
4-40
HDLM Operation
Hitachi Dynamic Link Manager (for Solaris) User Guide