HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 394)

Selectable items Sub-parameters
DNum dnu
HDevName hd
IEP iep
HBAPortWWN hbaportwwn
Physical-LDEV phys
Virtual-LDEV virt
Physical-DskName vid
Physical-iLU vid
Physical-ChaPort vid
Org-DskName ha
Org-iLU ha
#
Because both PathID and Status are always displayed, you do not have
to specify any parameters.
In the sub-parameters following -path -item, you can list the paths (-
hdev) and sort the list (-srt). If you omit both parameters, the command
displays information for all the paths in ascending order of AutoPATH_IDs.
These sub-parameters are:
-pstv|-vstv
If the -pstv parameter is specified, information about the physical
storage system is displayed. If the -vstv parameter is specified,
information about the storage system recognized by the operating
system is displayed. If neither parameter is specified, information is
displayed according to the value specified in the -pstv parameter of
set operations.
For information about the items that are displayed differently
depending on the specified -pstv and -vstv parameters, see Table
6-10 Display items for which the display results of the view operation
differ depending on the -pstv parameter specification on page 6-32 in
Parameters on page 6-18 .
-hdev host-device-name
Displays information only for the paths accessing the specified host
device.
Specify the name of the logical device file (minus the slice number, in
cUtXdY format) for the HDLM device to indicate the desired host
device.
The host-device-name string is case sensitive.
When you specify this parameter, HDevName is displayed by default. It
is not necessary to specify hd for the -item parameter.
6-46
Command Reference
Hitachi Dynamic Link Manager (for Solaris) User Guide