HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 354)

Valid value
AutoPATH_ID { 000000 - 999999 }(Decimal)
HBA_ID { 00000 - 99999 }(Decimal)
CHA_ID { 00000 - 99999 }(Decimal)
help:
Format
dlnkmgr help { clear | offline | online | set | view |
monitor | add | delete }
KAPL01001-I The HDLM command completed normally. Operation name
= help, completion time = yyyy/mm/dd hh:mm:ss
#
Example 3
The following example shows how to display the operations that can be
specified for the help operation
# /opt/DynamicLinkManager/bin/dlnkmgr help help
help:
Format
dlnkmgr help { clear | offline | online | set | view |
monitor | add | delete }
KAPL01001-I The HDLM command completed normally. Operation name
= help, completion time = yyyy/mm/dd hh:mm:ss
#
offline (Places Paths Offline)
The dlnkmgr command's offline operation places online paths offline.
Specify the paths to be placed offline by specifying an HBA port, CHA port, or
single path. Instead of specifying a path, you can also specify a SCSI device
name.
There must always be at least one online path accessing each LU.
Placing too many paths offline might prevent paths from being able to switch
if an error occurs. Before placing a path offline, use the view operation to
check how many online paths remain. For details on the view operation, see
view (Displays Information) on page 6-34 .
Format
To place paths offline
/opt/DynamicLinkManager/bin/dlnkmgr offline
[-path]
{-hba host-port-number.bus-number
|-hbaid HBA-port-ID
|-cha -pathid AutoPATH_ID
|-chaid CHA-port-ID
6-6
Command Reference
Hitachi Dynamic Link Manager (for Solaris) User Guide