HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 411)

The following table lists the correspondence between the display items
that can be added by using the -item parameter and the parameter
values that can be specified after the -item parameter.
Table 6-17 Items That Can Be Added by Using the -lu -c -item
Parameter and Sub-parameters
Item that can be added Sub-parameter
SLPR slpr
The following show the sub-parameter:
-pstv|-vstv
If the -pstv parameter is specified, information about the physical
storage system is displayed. If the -vstv parameter is specified,
information about the storage system recognized by the operating
system is displayed. If neither parameter is specified, information is
displayed according to the value specified in the -pstv parameter of
set operations.
For information about the items that are displayed differently
depending on the specified -pstv and -vstv parameters, see Table
6-10 Display items for which the display results of the view operation
differ depending on the -pstv parameter specification on page 6-32 in
Parameters on page 6-18 .
-t
Omits the title for each information item.
Example
The following example describes how to add and display a summary of
SLPR.
Displayed LU information
Table 6-18 Displayed LU Information on page 6-64 describes the displayed
LU information. The following explains the table headings:
• No summary displayed: The user specifies the -lu parameter or -lu -
item parameter.
• Summary displayed: The user specifies the -lu -c parameter or -lu -c -
item parameter.
Command Reference
6-63
Hitachi Dynamic Link Manager (for Solaris) User Guide